racertracer wrote:
The rear main seal on my buddies CRD is leaking heavily.. anybody have any advice on how to proceed to replace it correctly .. done it before?
The machine shop replaced it once already and the leak came back.
Check the CCV system and make sure there is no obstructions to prevent full flow in the puck or hose.
Does it have the EHM? If so, try connecting it back to the OEM intake boot connection.
Make sure the intake boot is not cracked or leaking.
Are you sure its the rear main seal? There are a couple of oil galley plugs on the back of the engine and head that could leak and make you think it's the rear seal.
I remember on member having this issue. May want to search LOST?
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve