It is currently Wed Mar 20, 2019 10:23 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 73 posts ]  Go to page Previous  1, 2, 3, 4  Next
Author Message
 Post subject: Re: Provent mounts
PostPosted: Fri Aug 31, 2018 1:23 pm 
Offline
LOST Member

Joined: Thu Jan 07, 2016 2:19 pm
Posts: 170
Location: Shelton, WA
I order Sasquatch parts for myself and a friend's CRD. Already have a provent be the other CRD with need a kit. So hopefully I can help convince you of offering the hoses to use that have the unit while also selling kits. "It takes time to get a customer and a second to loose them".

_________________
Purchased 2006 LIberty CRD 82K 01/16
SS Cat Back Exhaust, Full EGR Delete,Provent, Michelin 245/70 R16 AT/2
Stock Tune, Serpentine Belt Service,160 Amp Alternator
10/17 96K, New Head, Injectors, ARP Studs, HDS T-Stat
04/18 99K, New Reman Trans
09/18 104K, Lift Pump
01/19 106K, OME Lift, Eaton TruTrac LSD in new rebuilt diff


Top
 Profile  
 
 Post subject: Re: Provent mounts
PostPosted: Sat Sep 01, 2018 6:34 am 
Offline
LOST Member

Joined: Mon Jul 18, 2016 6:33 am
Posts: 149
Location: Central KY
GordnadoCRD wrote:
Family first, Bud.

WE normally only get one, they are ultimately temporary, so make the most of it while you can.


My sentiments exactly, well put.

_________________
2005 Liberty CRD, stock (as far as I know?) with 101,XXX miles


Top
 Profile  
 
 Post subject: Re: Provent mounts
PostPosted: Sun Sep 30, 2018 8:21 am 
Offline
LOST Member
User avatar

Joined: Sun Jan 29, 2006 5:05 pm
Posts: 290
Monthly still-interested nudge for Seth ;)

_________________
2005 KJ CRD Limited 4x4:
225/75R16 Goodyear TrailRunner ATs
OME 1.5" HD Lift
JBA Lifted A-Arms
IRO WJ Short rear UCA / WWDiesel mount
Yeti's Stage 2 tune
HDS Model 001 Thermostat at 203°F
Stage 1 & 2 Weeks Kit
Bosch 5V glow plugs / 7V programming
Hayden 2986 fan clutch / GM 11-blade fan
Samco Intercooler Hoses
Provent 200
V6 Airbox


Top
 Profile  
 
 Post subject: Re: Provent mounts
PostPosted: Sun Sep 30, 2018 8:47 pm 
Offline
LOST Addict
User avatar

Joined: Sat Aug 27, 2016 9:12 pm
Posts: 2217
Location: Oregon Coast Dairy Country. Land of stumps, dumps, and "Liquid Pumps"
Trust that Seth has it high on his list. He'll get to it.

_________________
'06 Lbrty Sprt CRD 150K

Sasquatch
DSS Turbo
CAT-elimntr
Weeks Stg1&2 EGRfix
PV-200
BLING
vent gauges

IDParts
head
cams
rockers
Timing set
ARP studs
eTn1 GX2123 5v GPs

YETI Custom Tune
Flowmaster 8325508
Carter P76611M
GM 12611872
Hayden 2986
GM 15976889
PATC Custom Billet
2010 Ram Hemi Trans
Sonnax 44957
Transgo kit
Cooper 51770


Top
 Profile  
 
 Post subject: Re: Provent mounts
PostPosted: Tue Oct 02, 2018 9:54 am 
Offline
LOST Junkie
User avatar

Joined: Mon Jul 30, 2012 3:29 pm
Posts: 727
Location: Minnesota
I haven't forgotten. Things are moving forward. :rockon:

_________________
Supporting Vendor

SasquatchParts.com
VM Motori Parts & Performance​

Jeep Liberty 2.8L CRD
Chevy Colorado/GMC Canyon 2.8L Duramax​
RAM 1500 3.0L EcoDiesel
Jeep Grand Cherokee 3.0L EcoDiesel


Top
 Profile  
 
 Post subject: Re: Provent mounts
PostPosted: Tue Oct 02, 2018 9:18 pm 
Offline
LOST Newbie

Joined: Sun Aug 13, 2017 4:05 pm
Posts: 50
Interested Seth. Please keep us posted

_________________
2006 Limited since factory new
Weeks 1 & 2
GDE Eco Tune
HDS 001 with 203° Stant
MBRP Cat Back - Stainless
Fumoto F102
ARB bumper
Bilsteins
Michelin Defender LTX 235/70/R16


Top
 Profile  
 
 Post subject: Re: Provent mounts
PostPosted: Tue Oct 16, 2018 7:53 pm 
Offline
LOST Newbie

Joined: Fri Dec 03, 2010 8:12 pm
Posts: 85
Location: Coal Creek Canyon, CO
Seth - yes do keep us posted on the ProVent pre-order kits. I'd even be interested in being a beta tester. Also interested in finding out more about the custom intercooler piping that you came up with for the turbo outlet CAC!


Top
 Profile  
 
 Post subject: Re: Provent mounts
PostPosted: Sun Oct 21, 2018 9:03 pm 
Offline
LOST Newbie

Joined: Sat Jun 17, 2006 1:53 am
Posts: 48
Location: Houston, TX
weeks101 wrote:
I haven't forgotten. Things are moving forward. :rockon:


I’d like to order. Need to do this very soon.

_________________
2006 Liberty CRD Sport Black
EHM, ORM, FUMOTO, SAMCO HOSES, SKYJACKER
REBUILT @ 105K
ARP HEAD STUDS
GDE HOT TUNE
FLORIDA TORQUE CONVERTER
WEEKS KIT
JBA UCA’s
Etecno 5v Glow Plugs
Updated Fuel Filter Head


Top
 Profile  
 
 Post subject: Re: Provent mounts
PostPosted: Mon Oct 22, 2018 11:11 am 
Offline
LOST Junkie
User avatar

Joined: Mon Jul 30, 2012 3:29 pm
Posts: 727
Location: Minnesota
Awesome, we are just waiting for the hoses to be finished.

_________________
Supporting Vendor

SasquatchParts.com
VM Motori Parts & Performance​

Jeep Liberty 2.8L CRD
Chevy Colorado/GMC Canyon 2.8L Duramax​
RAM 1500 3.0L EcoDiesel
Jeep Grand Cherokee 3.0L EcoDiesel


Top
 Profile  
 
 Post subject: Re: Provent mounts
PostPosted: Tue Oct 23, 2018 8:29 pm 
Offline
LOST Member

Joined: Sat Jul 13, 2013 10:18 pm
Posts: 223
Location: Harshaw, WI
Been watching this thread also. I'll be wanting a bracket and hoses. Already have the prevent.

Sent from my HTC6525LVW using Tapatalk

_________________
2005 Jeep Liberty CRD Limited
-Timing belt
-Weeks 1 and 2 EGR delete kits


Top
 Profile  
 
 Post subject: Re: Provent mounts
PostPosted: Fri Dec 07, 2018 7:33 pm 
Offline
LOST Newbie
User avatar

Joined: Tue Sep 04, 2018 5:53 pm
Posts: 45
Location: Central Iowa, USA
I picked up a Provent 200 at one of the recent online sales and got around to finishing my install today. I made up a mount like WWDiesel showed us on the first page of this thread. I fabbed up some hoses out of 3/4" corrugated stainless steel flexible gas pipe (CSST) and some reinforced vinyl tubing. The CSST worked pretty well - easy to shape and cut and the 3/4" id vinyl tubing fit tightly over it. It has been mentioned by others too that the 1" id vinyl tubing fits tightly over the 3/4" vinyl tubing, making for easy reducers.

The pic below shows the hoses after I got them shaped and assembled. The lower piece you see is the old vinyl CCV puck to intake tubing. A previous owner had obviously replaced the original rubber hose with reinforced vinyl. I had to put that hose clamp on a few months ago to unkink it in one spot.
Image

Lower hose routed and in place:
Image

Both hoses in:
Image

All dressed and ready for the road:
Image

I routed 1/2" clear vinyl tubing from the Provent drain to the lower right front of the jeep and attached a crude drain valve. I stuffed the valve into a cavity in front of the washer fluid bottle in such a way that the clear hose will kind of serve as a sight window for the collected oil - at least until the tubing gets all cloudy and nasty.
Image
Image

I fill my engine oil to just above the min mark on my dipstick (6.4 quarts), so I'll be interested to see how much oil this thing catches. I've never had my turbo intake hose or my intercooler hoses off, but there is visible oil seepage at the junctions. I intend to clean that all up at the next TB change.

_________________
2005 KJ CRD ~135K
V6 Airbox, Samco Hoses, Provent, Weeks Intake Kit 1&2
Facet Fuel Pump, Secondary Fuel Filter
GDE Eco Tune Full Torque
2" Junkyard Lift, 245/75/16s, Spidertrax


Top
 Profile  
 
 Post subject: Re: Provent mounts
PostPosted: Fri Dec 07, 2018 10:08 pm 
Offline
LOST Addict
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 4431
Location: Central GA
Looks good,
good job on the mounting and pipe routing. I like the bendable pipe that you can shape at will... :D

_________________
Proud Supporting Vendor of LOST
05 Jeep Liberty CRD Limited :JEEPIN:

Ironman Springs/Bilstein's
Yeti Stg4 MaxTune
Weeks ElbowKit/BatteryTray
NO FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pump
2mic.Sec.Fuel Filter
Flowmaster/NOcat
V6 Airbox
GM11 blade fan/NAPA HDclutch
Ironrock Trilink
Dodge Cummins, 5"exh. Viair, Huge K&N


Top
 Profile  
 
 Post subject: Re: Provent mounts
PostPosted: Sat Dec 08, 2018 5:27 am 
Offline
LOST Member

Joined: Mon Jul 18, 2016 6:33 am
Posts: 149
Location: Central KY
That looks clean and almost factory! Great job!

_________________
2005 Liberty CRD, stock (as far as I know?) with 101,XXX miles


Top
 Profile  
 
 Post subject: Re: Provent mounts
PostPosted: Sat Dec 08, 2018 10:01 am 
Offline
LOST Newbie

Joined: Sun Aug 13, 2017 4:05 pm
Posts: 50
Fine job. Keep us posted on oil collected.

Another project on my list.....

_________________
2006 Limited since factory new
Weeks 1 & 2
GDE Eco Tune
HDS 001 with 203° Stant
MBRP Cat Back - Stainless
Fumoto F102
ARB bumper
Bilsteins
Michelin Defender LTX 235/70/R16


Top
 Profile  
 
 Post subject: Re: Provent mounts
PostPosted: Sat Dec 08, 2018 7:25 pm 
Offline
LOST Newbie
User avatar

Joined: Tue Sep 04, 2018 5:53 pm
Posts: 45
Location: Central Iowa, USA
Thanks. I will keep you posted on oil collected. I drove it after the install yesterday and sprung a decent coolant leak from the hose on the upper reservoir that I took off to route the provent hoses. Today the old spring clamp got replaced with a better hose clamp. :rockon:

_________________
2005 KJ CRD ~135K
V6 Airbox, Samco Hoses, Provent, Weeks Intake Kit 1&2
Facet Fuel Pump, Secondary Fuel Filter
GDE Eco Tune Full Torque
2" Junkyard Lift, 245/75/16s, Spidertrax


Top
 Profile  
 
 Post subject: Re: Provent mounts
PostPosted: Sun Dec 09, 2018 10:05 am 
Offline
LOST Newbie

Joined: Sun Aug 13, 2017 4:05 pm
Posts: 50
iakj11 wrote:
Thanks. I will keep you posted on oil collected. I drove it after the install yesterday and sprung a decent coolant leak from the hose on the upper reservoir that I took off to route the provent hoses. Today the old spring clamp got replaced with a better hose clamp. :rockon:


I have given up trying to reuse the OEM spring clamps. IMHO they are toast after removing.

_________________
2006 Limited since factory new
Weeks 1 & 2
GDE Eco Tune
HDS 001 with 203° Stant
MBRP Cat Back - Stainless
Fumoto F102
ARB bumper
Bilsteins
Michelin Defender LTX 235/70/R16


Top
 Profile  
 
 Post subject: Re: Provent mounts
PostPosted: Fri Dec 14, 2018 6:48 pm 
Offline
LOST Junkie
User avatar

Joined: Mon Jul 30, 2012 3:29 pm
Posts: 727
Location: Minnesota
Finally have an update for you guys, our kit will be ready to purchase within the next week or two! (After Christmas but before the end of the year.) :pepper:

_________________
Supporting Vendor

SasquatchParts.com
VM Motori Parts & Performance​

Jeep Liberty 2.8L CRD
Chevy Colorado/GMC Canyon 2.8L Duramax​
RAM 1500 3.0L EcoDiesel
Jeep Grand Cherokee 3.0L EcoDiesel


Top
 Profile  
 
 Post subject: Re: Provent mounts
PostPosted: Sat Dec 15, 2018 6:31 am 
Offline
LOST Member

Joined: Mon Jul 18, 2016 6:33 am
Posts: 149
Location: Central KY
WOO HOO!

Thanks!

_________________
2005 Liberty CRD, stock (as far as I know?) with 101,XXX miles


Top
 Profile  
 
 Post subject: Re: Provent mounts
PostPosted: Sat Dec 15, 2018 9:52 am 
Offline
LOST Newbie

Joined: Sun Aug 13, 2017 4:05 pm
Posts: 50
weeks101 wrote:
Finally have an update for you guys, our kit will be ready to purchase within the next week or two! (After Christmas but before the end of the year.) :pepper:


Great news Seth.

_________________
2006 Limited since factory new
Weeks 1 & 2
GDE Eco Tune
HDS 001 with 203° Stant
MBRP Cat Back - Stainless
Fumoto F102
ARB bumper
Bilsteins
Michelin Defender LTX 235/70/R16


Top
 Profile  
 
 Post subject: Re: Provent mounts
PostPosted: Sun Dec 16, 2018 11:42 am 
Offline
LOST Member
User avatar

Joined: Sun Jan 29, 2006 5:05 pm
Posts: 290
weeks101 wrote:
Finally have an update for you guys, our kit will be ready to purchase within the next week or two! (After Christmas but before the end of the year.) :pepper:


AWESOME!!!

Thanks, Seth!

_________________
2005 KJ CRD Limited 4x4:
225/75R16 Goodyear TrailRunner ATs
OME 1.5" HD Lift
JBA Lifted A-Arms
IRO WJ Short rear UCA / WWDiesel mount
Yeti's Stage 2 tune
HDS Model 001 Thermostat at 203°F
Stage 1 & 2 Weeks Kit
Bosch 5V glow plugs / 7V programming
Hayden 2986 fan clutch / GM 11-blade fan
Samco Intercooler Hoses
Provent 200
V6 Airbox


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 73 posts ]  Go to page Previous  1, 2, 3, 4  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: cwmdiesel, Exabot [Bot] and 39 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com