Hi all,
Got check engine light on, no noticeable issues with starts or anything else. Cleared the codes with Torque, but after couple of days those P1261 + P0671 popped up again. According to this page
https://www.autocodes.com/p1261_jeep.htmlthere are several possible issues. Checked glow plugs resistance following the write up by squeeto - all show the same 4 Ohms - the value is suspiciously high, but I have used a cheapo ohmmeter, the point is, it is the same for all plugs.
Weird thing: no adverse symptoms whatsoever.
Am I in for controller replacement?
Thanks in advance,
Alex