| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| vm motori 2.8 rotary assembly jig http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=89104 |
Page 1 of 1 |
| Author: | pulsenpal [ Wed Aug 08, 2018 9:04 pm ] |
| Post subject: | vm motori 2.8 rotary assembly jig |
I need an assembly jig for 2.8 crd --my previous units were sold as welding positioners so I removed headstock of 40 inch lathe with 24 in buck 3 jaw chuck it is beefy enough to support up to 4000 lb loads with hand positioning via gearbox and input sheave plan on mounting plate fixture using right motor mount pads https://plus.google.com/u/0/b/105038664 ... NnElYb17wE |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|