| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 2005 Rear speed sensor connector source? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=89128 |
Page 1 of 1 |
| Author: | Mountainman [ Tue Aug 14, 2018 2:51 pm ] |
| Post subject: | 2005 Rear speed sensor connector source? |
Need the OEM waterproof connector. I see other threads that don't list the PN. It's easy to find them with no gasket, which will last not very long. Thanks for any help! |
|
| Author: | WWDiesel [ Tue Aug 14, 2018 3:11 pm ] |
| Post subject: | Re: 2005 Rear speed sensor connector source? |
Mountainman wrote: Need the OEM waterproof connector. I see other threads that don't list the PN. It's easy to find them with no gasket, which will last not very long. Thanks for any help! OEM Rear axle wheel speed sensor repair kit - black 2 way: PN 68065018AA, 05013995AA  RockAuto:> https://www.rockauto.com/en/parts/mopar ... ector,2588 Amazon:> https://www.amazon.com/Mopar-MOPAR-0501 ... B01FKPIN3A Ebay also lists them!  
|
|
| Author: | Sir Sam [ Tue Aug 14, 2018 6:12 pm ] |
| Post subject: | Re: 2005 Rear speed sensor connector source? |
Mountainman wrote: Need the OEM waterproof connector. I see other threads that don't list the PN. It's easy to find them with no gasket, which will last not very long. Thanks for any help! I was in a bind so I picked up the Autozone one. I also filled the connector, both sides, with dieletric grease. The wires still had a seal at the backside. |
|
| Author: | Mountainman [ Wed Aug 15, 2018 1:04 pm ] |
| Post subject: | Re: 2005 Rear speed sensor connector source? |
Thanks, I don't know why my google searches kept leading me to unsealed ones with no part number. Yeah, I have an unsealed one in there now, but it's a twist and tape temporary deal. I tried to bypass the connector by soldering the wires directly to the pins, and sealed it up with silicone, but the sensor couldn't take the heat and lasted about 3 miles 
|
|
| Author: | Mountainman [ Wed Aug 15, 2018 1:16 pm ] |
| Post subject: | Re: 2005 Rear speed sensor connector source? |
Ok Mopar, you can choke on your $30 connector. I'll cut another to expose the pins, and make up a sealed one with silicone and NO solder. Takes like 5 minutes. Then unwrap it with tape and I don't even have to wait for the silicone to dry. I'd pay that kind of money for a 3+ multi-pack, but actually, even the factory ones need re-greased periodically. I like my permanent solution. I'll try to post some pics |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|