dunl wrote:
Well, I borrowed a boost modulator from another CRD, The 0299 underboost code disappeared, but she still took off like a snail in first. I can get it up to speed, but it barely moves to start. I did find one interesting thing of note: when put into reverse and given lots of accelerator, it takes off like I would expect a turbo to do so. IOW, reverse is so much faster than 1st.
These are the current codes it is pulling:
0121 - TP Sensor Voltage Does Not Agree with MAP (guess I will give it a clean, prob gunked up from all the issues I am having)
These two codes though...
0146
1250
Can someone shed some light on them?
Thanks.
1250; do you have the vacuum solenoid unplugged?
P1250 Vacuum Reservoir Solenoid Open Circuit
I don't believe these two DTC's apply to your vehicle.
P0121 - Throttle Position Sensor A Circuit Range/Performance
Jeep CRD's have no Throttle Position Sensor.
P0146 - HO2S Circuit Insufficient Activity Bank 1 Sensor 3
Jeep CRD's have no oxygen sensors.
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve