I am replying since no one else has. I believe this is the code for turbo overboost. I would check all the vacuum lines, clean or replace MAP sensor, its possible the vacuum solenoid needs replacing especially if the turbo rod moves fully manually . I am not sure if its the vacuum solenoid that you replaced.
There are several threads on this topic you might find more explanation. Just put in p0234 in the search engine. If it stops searching and says something like can t search now immediately put it in again and it should show many threads about this. There are other ways to search see the topic at top of forum first 5 or 6 topics if you have problems with search.
_________________ 05 Blu LIM, OME GDE Tbo, wk II 245/75/17, KC Lights, bull bar, 195K H TC 05 Blu Lim, Dayton, GDE HT, 255/75/18 , 210K , H TC 06 Bla Lim, GDE Eco, Destination AT 245/75/17, 151K, H TC 06 D Khaki Lim 126K wkII Eur TC 05 D khaki Lim 145k refurbishing All CRDS: Fumoto, Lift , Fan Shroud mod, fuel head Gen II, SAMCOS,self TB, 2 Mic filt, Hayden
|