Does anyone have any experience with or thoughts on this EGR delete kit on ebay?

https://www.ebay.com/i/222554433039?chn=ps

I apologize if this has already been covered elsewhere.

Thanks!

_________________
2006 silver Liberty CRD, ECO tune, EGR delete, 3.5 in magnaflow muffler, 2.5" lift, 245/75/16

I don't believe anyone has reported using one of them off eBay so far. But the picture and components looks just like the one Sasquatch used to offer and many of us on this forum have one of them current installed including myself.


There is also a very similar kit offered on eBay for less $ and pipe is one piece and does not require the additional boost hose fitting and 2 clamps like the one you linked. It also shows most all the necessary components in the picture and says it is made in the USA. It does not show a plug for the exhaust manifold but you could make one if you want to totally remove the EGR feed pipe rather than just blanking the end of it off.
https://www.ebay.com/i/291991558670?rt= ... 1991558670

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

That's a lot of money for steel elbow and a flange !!!!!

Hey now it's got paint on it too /sarc

_________________
Purchased 2006 LIberty CRD 82K 01/16
SS Cat Back Exhaust, Full EGR Delete,Provent, Michelin 245/70 R16 AT/2
Stock Tune, Serpentine Belt Service,160 Amp Alternator
10/17 96K, New Head, Injectors, ARP Studs, HDS T-Stat
04/18 99K, New Reman Trans
09/18 104K, Lift Pump
01/19 106K, OME Lift, Eaton TruTrac LSD in new rebuilt diff

I believe it's all aluminum and tig welded.
Still well worth the price NOT to have an EGR system clogging up your intake with sootpies and destroying your engine by dumping horrible amounts of soot into it like the one pictured.
Guess it boils down to how much prevention you like to provide for your engine???

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

Thanks for the info! I ended up ordering the one you found. I should be able to make a plug without too much trouble.

_________________
2006 silver Liberty CRD, ECO tune, EGR delete, 3.5 in magnaflow muffler, 2.5" lift, 245/75/16

you can just use the original parts and install studs to make it easier to get on and off in future blocking off the no longer necessary ports and removing the butterfly valve for about $5 or so and retain factory appearance. The kit parts do look better though!

_________________
05 Blu LIM, OME GDE Tbo, wk II 245/75/17, KC Lights, bull bar, 195K H TC
05 Blu Lim, Dayton, GDE HT, 255/75/18 , 210K , H TC
06 Bla Lim, GDE Eco, Destination AT 245/75/17, 151K, H TC
06 D Khaki Lim 126K wkII Eur TC
05 D khaki Lim 145k refurbishing
All CRDS: Fumoto, Lift , Fan Shroud mod, fuel head Gen II, SAMCOS,self TB, 2 Mic filt, Hayden