LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

EGR delete kit
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=90044		 Page 1 of 1
Author:  pnwjk [ Thu May 23, 2019 11:39 pm ]
Post subject:  EGR delete kit
Does anyone have any experience with or thoughts on this EGR delete kit on ebay?

https://www.ebay.com/i/222554433039?chn=ps

I apologize if this has already been covered elsewhere.

Thanks!
Author:  WWDiesel [ Thu May 23, 2019 11:52 pm ]
Post subject:  Re: EGR delete kit
pnwjk wrote:
Does anyone have any experience with or thoughts on this EGR delete kit on ebay?
https://www.ebay.com/i/222554433039?chn=ps
I apologize if this has already been covered elsewhere.
Thanks!

I don't believe anyone has reported using one of them off eBay so far. But the picture and components looks just like the one Sasquatch used to offer and many of us on this forum have one of them current installed including myself.


There is also a very similar kit offered on eBay for less $ and pipe is one piece and does not require the additional boost hose fitting and 2 clamps like the one you linked. It also shows most all the necessary components in the picture and says it is made in the USA. It does not show a plug for the exhaust manifold but you could make one if you want to totally remove the EGR feed pipe rather than just blanking the end of it off.
https://www.ebay.com/i/291991558670?rt= ... 1991558670

Image
Author:  PZKW108 [ Fri May 24, 2019 12:09 am ]
Post subject:  Re: EGR delete kit
That's a lot of money for steel elbow and a flange !!!!!
Author:  vwroad87 [ Fri May 24, 2019 1:34 am ]
Post subject:  Re: EGR delete kit
PZKW108 wrote:
That's a lot of money for steel elbow and a flange !!!!!

Hey now it's got paint on it too /sarc
Author:  WWDiesel [ Fri May 24, 2019 2:47 pm ]
Post subject:  Re: EGR delete kit
PZKW108 wrote:
That's a lot of money for steel elbow and a flange !!!!!

I believe it's all aluminum and tig welded.
Still well worth the price NOT to have an EGR system clogging up your intake with sootpies and destroying your engine by dumping horrible amounts of soot into it like the one pictured.
Guess it boils down to how much prevention you like to provide for your engine???

Image
Author:  pnwjk [ Sat May 25, 2019 4:13 pm ]
Post subject:  Re: EGR delete kit
WWDiesel wrote:
pnwjk wrote:
Does anyone have any experience with or thoughts on this EGR delete kit on ebay?
https://www.ebay.com/i/222554433039?chn=ps
I apologize if this has already been covered elsewhere.
Thanks!

I don't believe anyone has reported using one of them off eBay so far. But the picture and components looks just like the one Sasquatch used to offer and many of us on this forum have one of them current installed including myself.


There is also a very similar kit offered on eBay for less $ and pipe is one piece and does not require the additional boost hose fitting and 2 clamps like the one you linked. It also shows most all the necessary components in the picture and says it is made in the USA. It does not show a plug for the exhaust manifold but you could make one if you want to totally remove the EGR feed pipe rather than just blanking the end of it off.
https://www.ebay.com/i/291991558670?rt= ... 1991558670

Image

Thanks for the info! I ended up ordering the one you found. I should be able to make a plug without too much trouble.
Author:  TKB4 [ Sat May 25, 2019 9:08 pm ]
Post subject:  Re: EGR delete kit
you can just use the original parts and install studs to make it easier to get on and off in future blocking off the no longer necessary ports and removing the butterfly valve for about $5 or so and retain factory appearance. The kit parts do look better though!
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/