It is currently Fri Feb 13, 2026 5:28 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: P201 - Injector #1
PostPosted: Fri May 08, 2020 11:00 pm 
Offline
LOST Member

Joined: Fri Oct 16, 2015 11:31 pm
Posts: 284
Been playing tag with this fault for a while now. First happened 4 months ago, at that time I cleaned the electrical connector at the injector and reassembled, and it was fine for a while. Happened again a couple of weeks ago, cleaned the connector again, and used a pin to bend the metal contacts in for a bit more pressure. That worked for a couple of weeks. Now it's happening again.

This time I did some more "testing". I found that when it happens (pretty obvious missing on a cyl) if I pop the hood and push down on inj #1 electrical connector, it goes away. Certainly for as long as I am pressing on the electrical connector, and maybe a bit longer, some times.

So I am assuming that my next step is to get a replacement connector and splice it in. I found a Mopar 5143779AB part/kit which looks like it would work, and they are available online and maybe from my local stealership (will find out Monday). But wanted to ask if there is a generic part that some of the auto parts chains might have (Napa, etc) that I can lay my hands on sooner? Anyone know of such a thing?

Also, anyone have any experience with the injector side of this problem causing similar symptoms? I checked the injector electrical pins last time I was cleaning, and they all seems tight and clean, but I suppose it might be something internal. Although, I suspect the harness side, just cause it works and runs just fine once I clean those contacts (for a while at least), which I woud assume would not be the case if it were internal to the injector.

Thanks

_________________
2006 KJ CRD


Top
 Profile  
 
 Post subject: Re: P201 - Injector #1
PostPosted: Sat May 09, 2020 2:19 am 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7389
Location: Central GA
:idea: I remember it has been mentioned before that the earlier model Chevy/GMC 6.6 Duramax LLY, LBZ model diesels use the same injector connector.
It is a common problem on Duramax engines (2004 & 2005 model years) for the injector harness connectors to go bad.
check with your local Chevy dealer parts dept. GM PN: 88988963
or
You could buy a whole set of 8 of them on Amazon
Ebay also has plenty of them listed.
That way you will have some spares. :lol:
https://www.amazon.com/Fuel-Injector-Co ... B07B2W5RMC

Image

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: P201 - Injector #1
PostPosted: Mon May 11, 2020 12:22 pm 
Offline
LOST Member

Joined: Fri Oct 16, 2015 11:31 pm
Posts: 284
Thanks WW. Got some on the way.

_________________
2006 KJ CRD


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 35 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com