| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Strange noises under the hood http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=90140 |
Page 1 of 1 |
| Author: | erockskj [ Fri Jun 21, 2019 4:31 pm ] |
| Post subject: | Strange noises under the hood |
This has perplexed me for a while now and after replacing bearings with no improvement ... I took the fan off and this is where I found the noise  It is the fan mount bearing  long story short....ordered one from id parts ,they told me it was on back order said it should come in on the 06/14/2019 well it being the 21st I called for an eta and they basically said find one some other way  So her I am pleading  No begging for someone to help me find one  Thanks Erock. |
|
| Author: | WWDiesel [ Fri Jun 21, 2019 5:37 pm ] |
| Post subject: | Re: Strange noises under the hood |
erockskj wrote: This has perplexed me for a while now and after replacing bearings with no improvement ... I took the fan off and this is where I found the noise It is the fan mount bearing long story short....ordered one from id parts ,they told me it was on back order said it should come in on the 06/14/2019 well it being the 21st I called for an eta and they basically said find one some other way So her I am pleading No begging for someone to help me find one Thanks Erock. Mopar Parts Giant still list the 5142661AA part number as being available.  I would call them. https://www.moparpartsgiant.com/parts/m ... dition+4WD) There have been a few on this forum who have totally removed their fan and bracket so you may be able to find a good used one. Bone Yards? or See this post: this person replaced just the bearing:> viewtopic.php?p=920403&sid=398de3568eccf92a8027aa6ce009ca51#p920403 VM Specialist Ltd in England may also be a source for the part. http://www.vmdieselspecialist.com/ Good luck! |
|
| Author: | erockskj [ Mon Jun 24, 2019 11:36 am ] |
| Post subject: | Re: Strange noises under the hood |
Thanks WWDiesel I knew I could count on someone to help!  ordered one today 
|
|
| Author: | erockskj [ Wed Jun 26, 2019 1:17 pm ] |
| Post subject: | Re: Strange noises under the hood |
Got an email from mopargiant saying order has been canceled  The fan bracket (bearing) has been discontinued  Now I will be looking to bypass the fan bracket if I can decipher all the post on the subject  All I need is to bypass is the fan bracket ( I have already bypassed the coolant to the VH ) leaving the pulley. |
|
| Author: | flash7210 [ Thu Jun 27, 2019 12:09 pm ] |
| Post subject: | Re: Strange noises under the hood |
erockskj wrote: Got an email from mopargiant saying order has been canceled The fan bracket (bearing) has been discontinued Now I will be looking to bypass the fan bracket if I can decipher all the post on the subject All I need is to bypass is the fan bracket ( I have already bypassed the coolant to the VH ) leaving the pulley. That's bad news. But confirms what I already believed to be true. Looks like its a junk yard only part  I'm gonna to run to local bearing shop tomorrow to see if they can find a replacement. Bypassing the fan bracket it easy. Finding a correct length belt is more difficult. Might take some trial and error. |
|
| Author: | WWDiesel [ Thu Jun 27, 2019 1:48 pm ] |
| Post subject: | Re: Strange noises under the hood |
flash7210 wrote: erockskj wrote: Got an email from mopargiant saying order has been canceled The fan bracket (bearing) has been discontinued Now I will be looking to bypass the fan bracket if I can decipher all the post on the subject All I need is to bypass is the fan bracket ( I have already bypassed the coolant to the VH ) leaving the pulley. That's bad news. But confirms what I already believed to be true. Looks like its a junk yard only part I'm gonna to run to local bearing shop tomorrow to see if they can find a replacement. Bypassing the fan bracket it easy. Finding a correct length belt is more difficult. Might take some trial and error. If we can come up with a number for just the bearing, it should be easy to replace it. If we can not get a number, then an inside, an outside, and thickness measurement will tell us enough to cross it over to a number. Anyone got an old one they can check for a bearing number or can measure? |
|
| Author: | WolverineFW [ Thu Jun 27, 2019 2:15 pm ] |
| Post subject: | Re: Strange noises under the hood |
Mine is out right now...I will take a look when I get home. Sent from my SM-G965W using Tapatalk |
|
| Author: | WWDiesel [ Thu Jun 27, 2019 4:53 pm ] |
| Post subject: | Re: Strange noises under the hood |
WolverineFW wrote: Mine is out right now...I will take a look when I get home. Measurement must be very accurate. Most bearings have their part numbers engraved on the bearings themselves, but these often rub off over time and so it may be necessary to measure the bearing yourself to determine the correct part number. How to Measure Bearings:> http://motorsportsbearings.com/how-to-m ... rings.html Once you have the dimentions in mm, you can use this tool to find a bearing:> http://webtools3.skf.com/BearingCalc/se ... uct.action You can measure the dimensions of a bearing by using a vernier caliper like the one below. If it is in thousands of an inch, you can convert them to mm. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|