LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/
Exhaust manifold egr plug http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=90145	Page 1 of 1

---

Author:	Diesel kawboy [ Sun Jun 23, 2019 6:27 pm ]
Post subject:	Exhaust manifold egr plug
Does anyone know where I can find a exhaust manifold egr plug? Or perhaps someone has an extra one laying around? Thanks in advance

---

Author:	gollygeemister [ Mon Jun 24, 2019 12:01 am ]
Post subject:	Re: Exhaust manifold egr plug
I have heard you can tap it for a 3/4" NPT pipe plug.

---

Author:	TKB4 [ Mon Jun 24, 2019 12:00 pm ]
Post subject:	Re: Exhaust manifold egr plug
There is a thread about tapping it. I believe it was posted by racetracer. Try the search advice from outside forum. But if you are deleting the egr as I suspect you will no longer need the tube that runs from there to egr behind the engine and could either block it off at other end or do what I did. I just put the tube in a vise and bent it till it creased near the manifold end and then cut it off just past the bend and put a little high temp silicone inside to make sure it sealed totally. You could also weld it at the crease or cut it off without bending it and weld cap over it to close it off . My method you have to use the v-band clamp that was used originally but so did the old weeks kit.

---

Author:	TKB4 [ Mon Jun 24, 2019 12:01 pm ]
Post subject:	Re: Exhaust manifold egr plug
Here is a link to the thread viewtopic.php?f=5&t=86993

---

Author:	TKB4 [ Mon Jun 24, 2019 12:07 pm ]
Post subject:	Re: Exhaust manifold egr plug
And here is the block off plate dimensions for other end courtesy of WW diesel viewtopic.php?f=5&t=76576

---

Author:	Diesel kawboy [ Mon Jun 24, 2019 4:19 pm ]
Post subject:	Re: Exhaust manifold egr plug
Thanks for all the info. I ordered the kb diesel performance kit but it doesn't have a manifold plug.

---

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/