| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| ARB Bumper http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=90410 |
Page 1 of 1 |
| Author: | Huhhhhh [ Sun Sep 08, 2019 11:37 pm ] |
| Post subject: | ARB Bumper |
So I'm installing the ARB bumper on my 2006 CRD and can't make heads or tail out of the stock fog light part of the instructions. I took one out and can't seem to make it fit in the fog light bezel that came with the bumper. The pigtail connectors that came with the bumper don't fit into the stock connectors and the instructions keep referring to the existing fog lights being either a pre 2013 Toyoda or a 2013 Toyoda. What's Toyoda have to do with a Jeep and bumper for a jeep? Those of you who have the ARB bumper what is your fog light setup? Let see some pic's of your ARB bumper setups. |
|
| Author: | TKB4 [ Mon Sep 09, 2019 9:27 am ] |
| Post subject: | Re: ARB Bumper |
I don't have a clue but I know Mass Hole has an ARB bumper and he checks in fairly regularly but if you don't get a fairly quick response I am sure he wouldn't mind a direct email/PM. |
|
| Author: | CGman [ Mon Sep 09, 2019 6:51 pm ] |
| Post subject: | Re: ARB Bumper |
The good news is you figured out the instructions suck, bad news is the fog light fittings are not for jeeps. Be happy if you can get the fake closeouts installed correctly. |
|
| Author: | CGman [ Mon Sep 09, 2019 7:00 pm ] |
| Post subject: | Re: ARB Bumper |
I did a write up a couple years ago when I installed mine, it had info concerning this topic. Search for "ARB install issues" 3 or 4 years ago. |
|
| Author: | GordnadoCRD [ Mon Sep 09, 2019 9:00 pm ] |
| Post subject: | Re: ARB Bumper |
What I remember being reported is that the ARB bumper is made to be used specifically with ARB's lights, which are NOT included, but available at significant extra expense. They are NOT made for the Jeep lights to fit. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|