Another very good option for bleeding brakes and it only takes one person. And can be used on many different vehicles with the right adaptor cap.
Works really good!
0113 BLACK LABEL CHRYSLER POWER BLEEDER
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| BLEEDING BREAKS WITH SCAN TOOL http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=90480 |
Page 1 of 1 |
| Author: | rankom [ Fri Sep 27, 2019 9:53 pm ] |
| Post subject: | BLEEDING BREAKS WITH SCAN TOOL |
i apologize this was most likely covered before after replacing right rear break line it was rubbed through and lost alot of break fluid i left the jeep in the garage for a few weeks waiting on parts after installing a new line and bled the system normally im suspecting air was still trapped into ABS system so break pedal felt soft and goes all the way down. i took it for a road test and went on a gavel road to activate the ABS and traction control and it got better and i bled the system again but i do not have the DRB3 scan tool to perform auto bleed test. what do you guys suggest me do from here? find someone with the DRB3 tool or can another tool perform this procedure? thanks! |
|
| Author: | rankom [ Sat Sep 28, 2019 2:54 pm ] |
| Post subject: | Re: BLEEDING BREAKS WITH SCAN TOOL |
driving mad on a dirt road did the trick. break pedal is almost at 100%. but i might still end up getting autelmaxicheckpro scan tool from amazon. apparently thats the cheapest tool that can perform this break bleed thanks for reading. |
|
| Author: | rankom [ Sat Mar 28, 2020 3:20 pm ] |
| Post subject: | Re: BLEEDING BREAKS WITH SCAN TOOL |
finally I got my Autel Maxicheck Pro from amazon and it did a perfect job bleeding breaks, it took about 2 mins. and the pedal is back to normal and where it should be. |
|
| Author: | WWDiesel [ Sat Mar 28, 2020 4:16 pm ] |
| Post subject: | Re: BLEEDING BREAKS WITH SCAN TOOL |
Another very good option for bleeding brakes and it only takes one person. And can be used on many different vehicles with the right adaptor cap. Works really good! 0113 BLACK LABEL CHRYSLER POWER BLEEDER
|
|
| Author: | PZKW108 [ Sun Mar 29, 2020 11:28 pm ] |
| Post subject: | Re: BLEEDING BREAKS WITH SCAN TOOL |
A good ole plastic pop bottle work just fine as well and it's free !!!! |
|
| Author: | rankom [ Wed Apr 01, 2020 7:35 pm ] |
| Post subject: | Re: BLEEDING BREAKS WITH SCAN TOOL |
I don't drive this jeep often, just once in a while. for some reason I couldn't get the pedal to work 100% once I got the Autel MaxiCheckPRO and followed the procedure activated ABS pump the scanner said open up the bleeder screw on front right wheel and then open up the right rear wheel bleeder screw although I didn't see any air. but after that the pedal felt normal. so I do recommend this scanner. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|