It is currently Tue Jul 07, 2020 2:31 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Need Crank Dampener pulley ASAP!
PostPosted: Thu Dec 19, 2019 7:20 pm 
Offline
LOST Addict

Joined: Fri Jun 22, 2007 11:43 am
Posts: 4842
Location: Green Cove Springs FL
If someone has a used one they can sell me please send me an email.
flash 7210 at gmail .com

All the online mopar parts sites list it, 5072669AA, but none have it in stock.
I even called a couple of them to verify. None in stock anywhere and listed as back-ordered or discontinued.

The good news is that the horrible metallic rattling sound was not coming from behind the timing cover.
The bad news is that I cant find a new crank pulley.
:banghead:

_________________
Provent, intake elbow, and EGR delete. 5 volt bosch glow plugs
Yeti stage 4 ECU tune. Straight pipe exhaust. DIY intercooler hoses.
Aftermarket intercooler
Fixed Flex Fan and modified factory 190F thermostat
Replaced cylinder head (cracked) at 160,000 miles + ARP studs
2.5 inch lift, JBA upper arms, 235-85-16 tires.


Top
 Profile  
 
 Post subject: Re: Need Crank Dampener pulley ASAP!
PostPosted: Thu Dec 19, 2019 7:52 pm 
Offline
LOST Addict
User avatar

Joined: Sat Aug 27, 2016 9:12 pm
Posts: 2506
Location: Oregon Coast Dairy Country. Land of stumps, dumps, and "Liquid Pumps"
I've heard of an outfit that rebuilds them, but haven't been able to find anything tonight.

_________________
'06 Lbrty Sprt CRD 150K

Sasquatch
DSS Turbo
CAT-elimntr
Weeks Stg1&2 EGRfix
PV-200
BLING
vent gauges

IDParts
head
cams
rockers
Timing set
ARP studs
eTn1 GX2123 5v GPs

YETI Custom Tune
Flowmaster 8325508
Carter P76611M
GM 12611872
Hayden 2986
GM 15976889
PATC Custom Billet
2010 Ram Hemi Trans
Sonnax 44957
Transgo kit
Cooper 51770


Top
 Profile  
 
 Post subject: Re: Need Crank Dampener pulley ASAP!
PostPosted: Thu Dec 19, 2019 10:17 pm 
Offline
LOST Addict
User avatar

Joined: Sat Nov 23, 2013 8:57 pm
Posts: 2545
Location: Boise, Idaho
I have some extras but they all have the little cracks around the edges that apparently fail completely? I'll try to email you when I get home

_________________
05 CRD: H.D.S2 stat,WW Ironrock trilink, Integrated air OX front/rear, 4.10's, ARB bumper, Suncoast,OME 3.5, JBA UCA,rock rails, Moabs&265/75 Duratracs, GDE tunes ,FFD fan,ARP's, 2 micron fuel, new valves,sasquatch battery tray & grid heater, tensioner relocated
Mech fan, VH & AC delete


Top
 Profile  
 
 Post subject: Re: Need Crank Dampener pulley ASAP!
PostPosted: Thu Dec 19, 2019 10:38 pm 
Online
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 5562
Location: Central GA
Several of the online vendors still list them as available. I would certainly call them to verify current availability.
https://www.summitracing.com/parts/mop-05072669aa/
http://parts-catalog.moparrepairconnect ... /5072669aa
https://www.tascaparts.com/oem-parts/mo ... -5072669aa
https://parts.jeepsareus.com/oem-parts/ ... 9aa?c=az0x
https://www.getoemparts.com/oem-parts/m ... -5072669aa

And one in Greece on eBay
https://www.ebay.com/itm/Engine-Cranksh ... SwDXJa3F9c

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/shocks
Yeti StgIV Hot Tune
Sasquatch BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox
GM11 bld. fan/NAPA HDclutch
IronrockArms/wwdieselMount


Top
 Profile  
 
 Post subject: Re: Need Crank Dampener pulley ASAP!
PostPosted: Fri Dec 20, 2019 5:08 pm 
Offline
LOST Addict
User avatar

Joined: Thu Sep 06, 2007 9:51 pm
Posts: 6209
Location: Somewhere between Heaven and Hell... But it is really hot here on Earth...
It may be time to see if we can get someone like Fluidampr involved in finding an acceptable option for our needs.

_________________
Proud supporting vendor of LOST Jeeps
Provider of high quality CRD service in your driveway.
Need help? Just ask! I've taken it apart more than most.
Email (button below) is preferred to PM
Over 70 CRDs currently driving with my timing belt, rockers, or ARP Studs.
Just remember: Bad noises = REALLY bad things.


Top
 Profile  
 
 Post subject: Re: Need Crank Dampener pulley ASAP!
PostPosted: Fri Dec 20, 2019 9:36 pm 
Offline
LOST Addict
User avatar

Joined: Sat Nov 23, 2013 8:57 pm
Posts: 2545
Location: Boise, Idaho
On a side note, and you probably already know this. But, I've seen these dampeners come loose, so I always put a drop of blue locktite on them. I had one of those omg my crank is knocking moments too.

_________________
05 CRD: H.D.S2 stat,WW Ironrock trilink, Integrated air OX front/rear, 4.10's, ARB bumper, Suncoast,OME 3.5, JBA UCA,rock rails, Moabs&265/75 Duratracs, GDE tunes ,FFD fan,ARP's, 2 micron fuel, new valves,sasquatch battery tray & grid heater, tensioner relocated
Mech fan, VH & AC delete


Top
 Profile  
 
 Post subject: Re: Need Crank Dampener pulley ASAP!
PostPosted: Mon Dec 23, 2019 5:47 pm 
Offline
LOST Addict

Joined: Fri Jun 22, 2007 11:43 am
Posts: 4842
Location: Green Cove Springs FL
Received a replacement crank dampener from Mountainman today.
Installed.
Test drove.
Works great.

https://youtu.be/365dzMVagto

_________________
Provent, intake elbow, and EGR delete. 5 volt bosch glow plugs
Yeti stage 4 ECU tune. Straight pipe exhaust. DIY intercooler hoses.
Aftermarket intercooler
Fixed Flex Fan and modified factory 190F thermostat
Replaced cylinder head (cracked) at 160,000 miles + ARP studs
2.5 inch lift, JBA upper arms, 235-85-16 tires.


Top
 Profile  
 
 Post subject: Re: Need Crank Dampener pulley ASAP!
PostPosted: Mon Dec 23, 2019 6:57 pm 
Offline
LOST Member

Joined: Sat Oct 01, 2016 8:24 pm
Posts: 334
GordnadoCRD wrote:
I've heard of an outfit that rebuilds them, but haven't been able to find anything tonight.


I've used Damper Doctor for lots of NLA pulleys. They always do great work:

https://www.damperdoctor.com/


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: MtnClimber and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com