I got this PN from here a while back and got one from Advance Auto.

It doesnt seem to thread on. Anyone else have an issue with this part ?

This is supposed to be the upgraded, greased decoupler.

Thanks

_________________
05 CRD
GDE Eco Full Torque & Towing TCM Tune
Suncoast, TransGo HD2, Sonnax Line Pressure Booster, upgraded Mopar pump/springs
Weeks' Stage 1 & 2
ProVent 200
Samco Hoses
V6 Airbox
Cummins In Tank Pump
2nd Gen Fuel Filter Head,
Donaldson P551313 Secondary Filter
Fumoto valve
OME lift, JBA UCAs
Backbone Winch Mount

Have these PN's on file: Litens 920720 or 920834A
Looks like you got the wrong PN?

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

As stated by WW, you need 920834A. Or you can get a Gates 37015P on Amazon for $46.

I did have trouble on my last one. The metal spacer did not come off the alternator shaft with the old pulley. The new pulley would not thread on with the spacer still attached. I had to use a screwdriver to carefully pry the spacer off the shaft. I also had to clean up the threads on the shaft with a metric die. I used an impact to spin the old pulley off and it buggered the threads slightly.

_________________
My collection of CRD's:
2005 Deep Beryl Green Pearlcoat
2006 Light Khaki Metallic Clearcoat
2006 Inferno Red Crystal Pearlcoat
2006 Midnight Blue Pearlcoat
2006 Gold Limited
2015 Black Ecodiesel
2015 Black Ecodiesel 2

I typo'ed in the title of the post (now edited).
i got the 920834A and it doesnt fit.

_________________
05 CRD
GDE Eco Full Torque & Towing TCM Tune
Suncoast, TransGo HD2, Sonnax Line Pressure Booster, upgraded Mopar pump/springs
Weeks' Stage 1 & 2
ProVent 200
Samco Hoses
V6 Airbox
Cummins In Tank Pump
2nd Gen Fuel Filter Head,
Donaldson P551313 Secondary Filter
Fumoto valve
OME lift, JBA UCAs
Backbone Winch Mount

Isn't that a left hand thread?

_________________
2006 Limited CRD: Frankenlift II, Fumoto Drain Plug, DIY Stage 1 Tune, In-Tank Lift Pump

That was it.....spacer did not come off with old decoupler. Pried that off and the 920834A went right on, The spacer that was on the alternator shaft is not readily apparent and appears like it belongs there. Thanks !

_________________
05 CRD
GDE Eco Full Torque & Towing TCM Tune
Suncoast, TransGo HD2, Sonnax Line Pressure Booster, upgraded Mopar pump/springs
Weeks' Stage 1 & 2
ProVent 200
Samco Hoses
V6 Airbox
Cummins In Tank Pump
2nd Gen Fuel Filter Head,
Donaldson P551313 Secondary Filter
Fumoto valve
OME lift, JBA UCAs
Backbone Winch Mount

I read thread and answers and went because the part number was the correct one but later saw it must have been edited to show the correct one. But great solution offered this is obviously where experience with that actual problem makes all the difference. Good work!!!

_________________
05 Blu LIM, OME GDE Tbo, wk II 245/75/17, KC Lights, bull bar, 195K H TC
05 Blu Lim, Dayton, GDE HT, 255/75/18 , 210K , H TC
06 Bla Lim, GDE Eco, Destination AT 245/75/17, 151K, H TC
06 D Khaki Lim 126K wkII Eur TC
05 D khaki Lim 145k refurbishing
All CRDS: Fumoto, Lift , Fan Shroud mod, fuel head Gen II, SAMCOS,self TB, 2 Mic filt, Hayden