SasquatchParts Fan Pulley & Bracket for Jeep Liberty 2.8L CRD

Unfortunately, OE Mopar fan bracket & pulley assemblies have been discontinued and are no longer available new from Mopar or anywhere else. So when the bearing fails, you’re out of luck! Until now!

This is a custom, direct replacement fan pulley and bracket assembly with upgraded bearing for the Jeep Liberty 2.8L CRD. No need for rebuild kits (requiring a shop press) or endless junk yard searches. Plus, this kit allows the bearing to be replaced in the future, if necessary. Made in the USA.

Assembly Includes:

- Custom machined bracket
- Custom machined pulley
- New upgraded bearing (replaceable)

_________________
SasquatchParts.com

Supporting Vendor

Jeep Liberty 2.8L CRD
Chevy Colorado/GMC Canyon 2.8L Duramax

Looks good Seth. Thanks for your continued R&D for us.

_________________
2006 Limited since factory new
HDS 001 with 203° Stant
MBRP Cat Back - Stainless
Fumoto F102
ARB bumper
Bilsteins
Michelin Defender LTX 235/70/R16

The appropriate terminology would be "Reverse engineering" not R&D !!!

This is a really nice part. I hope nobody complains about the price; that machine work is not cheap.

Seth,

While we’re on the topic of discontinued parts.

What about crank pulley/dampener?
Having Damper Doctor rebuild it seems to be the only option.

And what about the engine oil cooler?
A new “cooler” would be difficult but a bypass pipe/hose/plate would be easier.
Then combine that with a aftermarket oil cooler “sandwich plate” at the oil filter.
I know, a low volume item, but I had to get my replacement oil cooler from Latvia.

_________________
U.S. Army Retired