LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

New Product: SasquatchParts Fan Pulley & Bracket Assembly
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=91120		 Page 1 of 1
Author:  weeks101 [ Tue Mar 24, 2020 5:04 pm ]
Post subject:  New Product: SasquatchParts Fan Pulley & Bracket Assembly
SasquatchParts Fan Pulley & Bracket for Jeep Liberty 2.8L CRD

Unfortunately, OE Mopar fan bracket & pulley assemblies have been discontinued and are no longer available new from Mopar or anywhere else. So when the bearing fails, you’re out of luck! Until now!

This is a custom, direct replacement fan pulley and bracket assembly with upgraded bearing for the Jeep Liberty 2.8L CRD. No need for rebuild kits (requiring a shop press) or endless junk yard searches. Plus, this kit allows the bearing to be replaced in the future, if necessary. Made in the USA.

Assembly Includes:

- Custom machined bracket
- Custom machined pulley
- New upgraded bearing (replaceable)

Image

Image

Image

Image
Author:  snowballs [ Tue Mar 24, 2020 6:54 pm ]
Post subject:  Re: New Product: SasquatchParts Fan Pulley & Bracket Assembl
Looks good Seth. Thanks for your continued R&D for us.
Author:  PZKW108 [ Tue Mar 24, 2020 7:21 pm ]
Post subject:  Re: New Product: SasquatchParts Fan Pulley & Bracket Assembl
snowballs wrote:
Looks good Seth. Thanks for your continued R&D for us.


The appropriate terminology would be "Reverse engineering" not R&D !!!
Author:  TURBO-DIESEL-FREAK [ Wed Mar 25, 2020 7:37 am ]
Post subject:  Re: New Product: SasquatchParts Fan Pulley & Bracket Assembl
This is a really nice part. I hope nobody complains about the price; that machine work is not cheap.
Author:  flash7210 [ Wed Mar 25, 2020 11:37 am ]
Post subject:  Re: New Product: SasquatchParts Fan Pulley & Bracket Assembl
Seth,

While we’re on the topic of discontinued parts.

What about crank pulley/dampener?
Having Damper Doctor rebuild it seems to be the only option.

And what about the engine oil cooler?
A new “cooler” would be difficult but a bypass pipe/hose/plate would be easier.
Then combine that with a aftermarket oil cooler “sandwich plate” at the oil filter.
I know, a low volume item, but I had to get my replacement oil cooler from Latvia.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/