My trans shop says there's a plugged tap mid-right that's usable for a temp-sensor probe; pressurized flow, they says. Problem: probe is customary 1/8" npt [male] but needs an adapter to fit into a hole that looks to be suited for about a 1/16"npt. Anybody certain what that spec is? Maybe -3 AN female?
Thanks

_________________
'15: bought '05 w/138k.
'16: HG/Rockers/ARPs/Thermo/H20pump/TbeltKit/ Seals/ Mounts/Kennedy fuel pump.
'17: bought manual Gas donor for its' ARB F/R Airlockers, OME 2.5" lift (gas-rated), JBA UCAs, ARB bumper.
'19: Trans w/Suncoast/Transgo/HDdiscs, new OME CRD-rated lift, electric tri-fan setup, BlackMagics/Centric Premiums, Airbags.