LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Stuck on the road http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=91693 |
Page 1 of 2 |
Author: | ROKTAXI [ Sun Sep 27, 2020 2:49 pm ] |
Post subject: | Stuck on the road |
It finally happened: Scanner says cam sensor faulty. Towing my 13' travel trailer. Sunday 2:30pm ..near Hemlock NY. Was on my way to the west coast for 6 months. Any suggestions? Already tried local towing services. Long shot: any Lost Jeeps in the area that may have some info?? |
Author: | flash7210 [ Sun Sep 27, 2020 3:19 pm ] |
Post subject: | Re: Stuck on the road |
Did the engine just suddenly quit running? Is it completely not drivable? If it is the cam sensor, it’s easy to replace. The problem is finding a local parts store with one in stock. Sometimes these sensors start acting up when they get hot. So maybe once things cool down it will start up and move on it’s own. But you likely won’t make it far. |
Author: | ROKTAXI [ Sun Sep 27, 2020 4:20 pm ] |
Post subject: | Re: Stuck on the road |
Yes it just quit going up a very slight grade. Temp was getting a little high. After i get it back is there any one not to far from Rochester ny to fix it? |
Author: | WWDiesel [ Sun Sep 27, 2020 5:38 pm ] |
Post subject: | Re: Stuck on the road |
ROKTAXI wrote: Yes it just quit going up a very slight grade. Temp was getting a little high. After i get it back is there any one not to far from Rochester ny to fix it? Call and talk to Eric (owner) at South Main Auto Repair LLC 47 S Main St, Avoca, NY 14809 Phone: (607) 566-2225 He is one super smart mechanic when it comes to automotive electronics and repair in your area. He has a YouTube channel I follow and watch him repair all kinds of crazy electronic problems on vehicles. South Main Auto Repair LLC https://www.youtube.com/c/southmainautorepairavoca |
Author: | WolverineFW [ Sun Sep 27, 2020 11:59 pm ] |
Post subject: | Re: Stuck on the road |
You will also get a cam sensor code if your timing belt breaks. When was the belt last changed? Sent from my SM-G965W using Tapatalk |
Author: | ROKTAXI [ Mon Sep 28, 2020 6:51 am ] |
Post subject: | Re: Stuck on the road |
Factory re-man motor has about 65K on the clock. |
Author: | ROKTAXI [ Tue Sep 29, 2020 10:37 am ] |
Post subject: | Re: Stuck on the road |
Confirmed the timing belt broke. I'm about 1 hr from home. Sorting out how to get it home. Need to talk about a mobile lost Jeep mechanic. I live in Rochester NY. Help please! |
Author: | casm [ Tue Sep 29, 2020 12:55 pm ] |
Post subject: | Re: Stuck on the road |
ROKTAXI wrote: Confirmed the timing belt broke. I'm about 1 hr from home. Sorting out how to get it home. Need to talk about a mobile lost Jeep mechanic. I live in Rochester NY. Help please! Well, crap. Sorry to hear it. Hopefully you can get your CRD up and running again soon! |
Author: | ROKTAXI [ Tue Sep 29, 2020 5:55 pm ] |
Post subject: | Re: Stuck on the road |
So now I need a Mobile Mechanic to deal with fixing it... hopefully. Don't know the full extent of the collateral damage, but need to talk to him on how to assess futher. |
Author: | layback40 [ Tue Sep 29, 2020 7:38 pm ] |
Post subject: | Re: Stuck on the road |
ROKTAXI wrote: So now I need a Mobile Mechanic to deal with fixing it... hopefully. Don't know the full extent of the collateral damage, but need to talk to him on how to assess futher. You can send him an email or get him on FB. |
Author: | ROKTAXI [ Tue Sep 29, 2020 8:26 pm ] |
Post subject: | Re: Stuck on the road |
Who? |
Author: | graycenphil [ Tue Sep 29, 2020 11:22 pm ] |
Post subject: | Re: Stuck on the road |
I think they are referring to Geordi, who does timing belts on the road. Not sure how soon he can get to you. At least you have your camper... |
Author: | ROKTAXI [ Wed Sep 30, 2020 6:52 am ] |
Post subject: | Re: Stuck on the road |
How do i reach him? Hard to navigate with my cell phone. Could you provide a link for me? |
Author: | ROKTAXI [ Wed Sep 30, 2020 6:55 am ] |
Post subject: | Re: Stuck on the road |
Having the Jeep towed to my house this morning. |
Author: | graycenphil [ Wed Sep 30, 2020 7:00 am ] |
Post subject: | Re: Stuck on the road |
You can send an message or an email through this forum. I’m surprised he hasn’t seen this thread and stepped in, but I will alert him. |
Author: | layback40 [ Wed Sep 30, 2020 7:05 am ] |
Post subject: | Re: Stuck on the road |
ROKTAXI wrote: How do i reach him? Hard to navigate with my cell phone. Could you provide a link for me? memberlist.php?mode=viewprofile&u=8328 memberlist.php?mode=email&u=8328 Hope that helps. You should also follow up on WWDiesel's suggestion of a contact. To the best of my knowledge he has never given bad advice. |
Author: | ROKTAXI [ Wed Sep 30, 2020 7:40 am ] |
Post subject: | Re: Stuck on the road |
Thanks! I emailed him |
Author: | ROKTAXI [ Thu Oct 01, 2020 11:14 am ] |
Post subject: | Re: Stuck on the road |
Towed the Jeep back to Rochester. I've been contacted by Josh (didn't say his user name on LJ). Would that be geordi? Indicated it could be quite a while before he could get to it. Limited correspondence for some reason??? Trying to get this done before weather becomes an issue. Any other mobile mechanics I could contact? |
Author: | graycenphil [ Thu Oct 01, 2020 6:30 pm ] |
Post subject: | Re: Stuck on the road |
I only know him as Geordi, so I can’t say if that’s Josh. I’m not aware of any other traveling mechanics, sorry. |
Author: | geordi [ Sat Oct 03, 2020 5:05 pm ] |
Post subject: | Re: Stuck on the road |
Hey, sorry I didn't see this post before - and as a second bit of not great news, the email you sent did NOT get to me, so there may be something wrong with that area of the board now too. I'm Jim, Josh is not me, he also works on these but doesn't have as flexible a schedule or range as I do. I'll try emailing you directly from the board, but you can also call me: 561-245-1563. I do have the ability to get up to you and was already planning a trip to the NY area in the near future - BUT there is a small delay b/c I'm having eye surgery on Monday and they need to see me next Monday for a follow-up. BUT I was planning to be up there shortly after that, around the 14th. I can get you back on the road with just one day of work though, I know exactly what the engine needs from your description - but we can confirm everything once we are talking. |
Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |