Anyone know where I can borrow a DRB III or DRB III emulator from?

I would like to do a pinion reset/adjustment so my speedo and odometer is correct. I have done it before and have the printout to do the procedure in both section inside the BCM but just need the tool.

Last time I went to the dealer, the tech had no idea how to do even though I told him what needed to be done...wasted $140

Thanks

_________________
05 CRD; Rebuilt top end w/ARP studs, EGR delete, SEGR, 3.7L HD cooling fan, Samco hoses, in tank pump, JBA coil overs & control arms, KK clevis fork, 1/2" cradle drop, 1/4" motor mount lift, WJ rear upper trilink w/WW mount, WJ lower control arms, 4:10 gear, front/rear air lockers, ARB bumper, Rock Lizard sliders/roof rack, Mod T-stat

I wish you were closer to me, if you find yourself in northern co I can assist.

_________________
http://www.Colorado4Wheel.com
"Its not about what you can DO with your Jeep, its about where you can GO with your Jeep."
Knowledgeable - But Caustic

Thanks Sir Sam, closest I'll be will be in Moab for the Easter Jeep Safari here in a couple of weeks. Looks like I may need to rent one online so I can get this done before I drive to there.

_________________
05 CRD; Rebuilt top end w/ARP studs, EGR delete, SEGR, 3.7L HD cooling fan, Samco hoses, in tank pump, JBA coil overs & control arms, KK clevis fork, 1/2" cradle drop, 1/4" motor mount lift, WJ rear upper trilink w/WW mount, WJ lower control arms, 4:10 gear, front/rear air lockers, ARB bumper, Rock Lizard sliders/roof rack, Mod T-stat

I believe some of the higher end scanners like the SnapOn Verus Pro and a few others are capable of doing the reset/adjustment you desire.
A good mechanic shop may be able to help you?

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

I've checked some of the shops around here, but most have no idea what I'm talking about and they don't want me to use their machine to find out. If they do they want just as much as the dealers, so might as well just do it myself if I can find the device.

Think I found a place that will rent a DRB III emulator...3 days for $100. Seems like it will do everything I want to do. Might even correct the injector coding and see if I can program another key fob too.

_________________
05 CRD; Rebuilt top end w/ARP studs, EGR delete, SEGR, 3.7L HD cooling fan, Samco hoses, in tank pump, JBA coil overs & control arms, KK clevis fork, 1/2" cradle drop, 1/4" motor mount lift, WJ rear upper trilink w/WW mount, WJ lower control arms, 4:10 gear, front/rear air lockers, ARB bumper, Rock Lizard sliders/roof rack, Mod T-stat

Not to hijack this thread, but speaking of the DRBIII tool, does anybody out there have the ITIL ISIS Jan 2008 update disc that I could either borrow, or get a copy of? DVD or USB drive? I would be happy to pay for your trouble, supply a blank DVD or USB drive. I would sure appreciate it.

Thanks.