Does anyone have the part number for the camshaft alignment hole plugs? These are the little plugs that you remove to insert the camshaft locking pins. Thanks.

_________________
My collection of CRD's:
2005 Deep Beryl Green Pearlcoat
2006 Light Khaki Metallic Clearcoat
2006 Inferno Red Crystal Pearlcoat
2006 Midnight Blue Pearlcoat
2006 Gold Limited
2015 Black Ecodiesel
2015 Black Ecodiesel 2

Plug - 68038215AA
Sealing washer - 4720713

Thanks! Does not look like it is available anymore from Jeep. Might have to check the thread pitch and see if I can source it elsewhere.

_________________
My collection of CRD's:
2005 Deep Beryl Green Pearlcoat
2006 Light Khaki Metallic Clearcoat
2006 Inferno Red Crystal Pearlcoat
2006 Midnight Blue Pearlcoat
2006 Gold Limited
2015 Black Ecodiesel
2015 Black Ecodiesel 2

Yeah, nothing special about that bolt except, I suppose, the sealing washer to keep oil from seeping out. As long as whatever fits has a round/flange head, you'll be fine.

10mm x 1.0. Finding a bolt with the correct pitch was the hard part, when I made my own timing pins. Seems 1.25 and 1.5 pitch are more common than 1.0.

_________________
05 Liberty Sport (SEGR, Elephant hose, Caseless inline thermostat, Weeks Elbow, 7V Etecnos, V-6 airbox w/splashguard, Aussie shroud, Bees Timing belt procedure w/ IDPARTS, EVIC added, Leather Seats installed, Moog LBJs)
02 Jetta TDI wagon GLS (elephant hose mod), 5-Spd swap, Bilsteins, TT bushings
I stand UNDER my work!

Belmetric has these (and every other weird fastener). Maybe like:

https://www.belmetric.com/10x10-extra-f ... -5142.html

Or McMaster:

https://www.mcmaster.com/96144A262/

A metric hydraulic plug could work too I think:

https://www.grainger.com/product/39A340 ... gK1KPD_BwE