LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

part number for camshaft alignment hole plugs??
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=91811		 Page 1 of 1
Author:  Jay ne Ohio [ Fri Jan 15, 2021 3:38 pm ]
Post subject:  part number for camshaft alignment hole plugs??
Does anyone have the part number for the camshaft alignment hole plugs? These are the little plugs that you remove to insert the camshaft locking pins. Thanks.
Author:  thesameguy [ Fri Jan 15, 2021 4:41 pm ]
Post subject:  Re: part number for camshaft alignment hole plugs??
Plug - 68038215AA
Sealing washer - 4720713
Author:  Jay ne Ohio [ Fri Jan 15, 2021 5:14 pm ]
Post subject:  Re: part number for camshaft alignment hole plugs??
thesameguy wrote:
Plug - 68038215AA
Sealing washer - 4720713


Thanks! Does not look like it is available anymore from Jeep. Might have to check the thread pitch and see if I can source it elsewhere.
Author:  thesameguy [ Fri Jan 15, 2021 5:55 pm ]
Post subject:  Re: part number for camshaft alignment hole plugs??
Yeah, nothing special about that bolt except, I suppose, the sealing washer to keep oil from seeping out. As long as whatever fits has a round/flange head, you'll be fine.
Author:  SC RIGGR [ Tue Feb 02, 2021 12:32 pm ]
Post subject:  Re: part number for camshaft alignment hole plugs??
10mm x 1.0. Finding a bolt with the correct pitch was the hard part, when I made my own timing pins. Seems 1.25 and 1.5 pitch are more common than 1.0.
Author:  thesameguy [ Tue Feb 02, 2021 1:05 pm ]
Post subject:  Re: part number for camshaft alignment hole plugs??
Belmetric has these (and every other weird fastener). Maybe like:

https://www.belmetric.com/10x10-extra-f ... -5142.html

Or McMaster:

https://www.mcmaster.com/96144A262/

A metric hydraulic plug could work too I think:

https://www.grainger.com/product/39A340 ... gK1KPD_BwE
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/