So a couple months ago I began noticing an occasional problem where my liberty CRD would not start when I turn the key. I found that if I waited a little bit and then tried again, it would start. I researched the condition and it seems that the crank position sensor will cause this problem. I checked my error codes and found P0335 set. so I ordered a crank position sensor and checked YouTube for a simple step-by-step. I found this video I want to share: https://youtu.be/lO8GX3vcAyU

Yes, the new sensor has solved the starting problem. Yay!

_________________
2005 Jeep Liberty CRD
No mods that I know of.

Just tying to keep it on the road