It is currently Sat Feb 28, 2026 6:51 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Bad PCV/CCV valve
PostPosted: Thu Feb 04, 2021 5:42 pm 
Offline
LOST Member

Joined: Sat Jan 11, 2020 7:52 pm
Posts: 102
Location: New Mexico
I did a smoke test on my car and there was smoke coming out of the PCV/CCV valve what are the symptoms for this?

_________________
2006 Jeep Liberty CRD
Located in New Mexico
Owned since Aug 2018


Top
 Profile  
 
 Post subject: Re: Bad PCV/CCV valve
PostPosted: Thu Feb 04, 2021 5:47 pm 
Offline
LOST Junkie

Joined: Sat Oct 01, 2016 8:24 pm
Posts: 652
Can you clarify what you did and what you saw? A smoke test where? Smoke came out of where?


Top
 Profile  
 
 Post subject: Re: Bad PCV/CCV valve
PostPosted: Thu Feb 04, 2021 6:03 pm 
Offline
LOST Member

Joined: Sat Jan 11, 2020 7:52 pm
Posts: 102
Location: New Mexico
thesameguy wrote:
Can you clarify what you did and what you saw? A smoke test where? Smoke came out of where?
I blew smoke through the intake hose that connected to the air box. The smoke Came out through the bottom of the PCV valve.

_________________
2006 Jeep Liberty CRD
Located in New Mexico
Owned since Aug 2018


Top
 Profile  
 
 Post subject: Re: Bad PCV/CCV valve
PostPosted: Thu Feb 04, 2021 7:18 pm 
Offline
LOST Junkie

Joined: Sat Oct 01, 2016 8:24 pm
Posts: 652
Are you saying it escaped between the CCV puck and valve/cam cover? If so, you have a leak between the puck and cover that needs to be addressed.


Top
 Profile  
 
 Post subject: Re: Bad PCV/CCV valve
PostPosted: Thu Feb 04, 2021 7:26 pm 
Offline
LOST Member

Joined: Sat Jan 11, 2020 7:52 pm
Posts: 102
Location: New Mexico
thesameguy wrote:
Are you saying it escaped between the CCV puck and valve/cam cover? If so, you have a leak between the puck and cover that needs to be addressed.
Yes I wasn’t sure if it was the puck itself or not.

_________________
2006 Jeep Liberty CRD
Located in New Mexico
Owned since Aug 2018


Top
 Profile  
 
 Post subject: Re: Bad PCV/CCV valve
PostPosted: Thu Feb 04, 2021 10:23 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7390
Location: Central GA
There are two O rings that seal the CCV Puck to the top of the valve cover.
IDParts can supply a new CCV Puck and the O rings.

See this:> https://www.idparts.com/pcvccv-valve-ri ... 1e60a6bc94

Image
Image

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: Bad PCV/CCV valve
PostPosted: Thu Feb 04, 2021 10:40 pm 
Offline
LOST Member

Joined: Sat Jan 11, 2020 7:52 pm
Posts: 102
Location: New Mexico
WWDiesel wrote:
There are two O rings that seal the CCV Puck to the top of the valve cover.
IDParts can supply a new CCV Puck and the O rings.

See this:> https://www.idparts.com/pcvccv-valve-ri ... 1e60a6bc94

Image
Image
Would there be any codes if there was a bad puck? Or would I have to physically inspect it to find out?

_________________
2006 Jeep Liberty CRD
Located in New Mexico
Owned since Aug 2018


Top
 Profile  
 
 Post subject: Re: Bad PCV/CCV valve
PostPosted: Fri Feb 05, 2021 1:22 am 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7390
Location: Central GA
Chuci wrote:
Would there be any codes if there was a bad puck? Or would I have to physically inspect it to find out?

There is no electronics associated with this part.

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: Bad PCV/CCV valve
PostPosted: Fri Feb 05, 2021 3:05 pm 
Offline
LOST Member

Joined: Sat Jan 11, 2020 7:52 pm
Posts: 102
Location: New Mexico
WWDiesel wrote:
Chuci wrote:
Would there be any codes if there was a bad puck? Or would I have to physically inspect it to find out?

There is no electronics associated with this part.
Ok thank you I will check it out


Sent from my iPhone using Tapatalk

_________________
2006 Jeep Liberty CRD
Located in New Mexico
Owned since Aug 2018


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 32 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com