There are two O rings that seal the CCV Puck to the top of the valve cover.
IDParts can supply a new CCV Puck and the O rings.
See this:> https://www.idparts.com/pcvccv-valve-ri ... 1e60a6bc94
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Bad PCV/CCV valve http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=91847 |
Page 1 of 1 |
| Author: | Chuci [ Thu Feb 04, 2021 5:42 pm ] |
| Post subject: | Bad PCV/CCV valve |
I did a smoke test on my car and there was smoke coming out of the PCV/CCV valve what are the symptoms for this? |
|
| Author: | thesameguy [ Thu Feb 04, 2021 5:47 pm ] |
| Post subject: | Re: Bad PCV/CCV valve |
Can you clarify what you did and what you saw? A smoke test where? Smoke came out of where? |
|
| Author: | Chuci [ Thu Feb 04, 2021 6:03 pm ] |
| Post subject: | Re: Bad PCV/CCV valve |
thesameguy wrote: Can you clarify what you did and what you saw? A smoke test where? Smoke came out of where? I blew smoke through the intake hose that connected to the air box. The smoke Came out through the bottom of the PCV valve.
|
|
| Author: | thesameguy [ Thu Feb 04, 2021 7:18 pm ] |
| Post subject: | Re: Bad PCV/CCV valve |
Are you saying it escaped between the CCV puck and valve/cam cover? If so, you have a leak between the puck and cover that needs to be addressed. |
|
| Author: | Chuci [ Thu Feb 04, 2021 7:26 pm ] |
| Post subject: | Re: Bad PCV/CCV valve |
thesameguy wrote: Are you saying it escaped between the CCV puck and valve/cam cover? If so, you have a leak between the puck and cover that needs to be addressed. Yes I wasn’t sure if it was the puck itself or not.
|
|
| Author: | WWDiesel [ Thu Feb 04, 2021 10:23 pm ] |
| Post subject: | Re: Bad PCV/CCV valve |
There are two O rings that seal the CCV Puck to the top of the valve cover. IDParts can supply a new CCV Puck and the O rings. See this:> https://www.idparts.com/pcvccv-valve-ri ... 1e60a6bc94
|
|
| Author: | Chuci [ Thu Feb 04, 2021 10:40 pm ] |
| Post subject: | Re: Bad PCV/CCV valve |
WWDiesel wrote: There are two O rings that seal the CCV Puck to the top of the valve cover. Would there be any codes if there was a bad puck? Or would I have to physically inspect it to find out?
IDParts can supply a new CCV Puck and the O rings. See this:> https://www.idparts.com/pcvccv-valve-ri ... 1e60a6bc94 |
|
| Author: | WWDiesel [ Fri Feb 05, 2021 1:22 am ] |
| Post subject: | Re: Bad PCV/CCV valve |
Chuci wrote: Would there be any codes if there was a bad puck? Or would I have to physically inspect it to find out? There is no electronics associated with this part. |
|
| Author: | Chuci [ Fri Feb 05, 2021 3:05 pm ] |
| Post subject: | Re: Bad PCV/CCV valve |
WWDiesel wrote: Chuci wrote: Would there be any codes if there was a bad puck? Or would I have to physically inspect it to find out? There is no electronics associated with this part. Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|