LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

CCV valve or the puck
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=91858
Page 1 of 1

Author:  Chuci [ Thu Feb 11, 2021 4:31 pm ]
Post subject:  CCV valve or the puck

Is the puck supposed to have an o ring?

I bought a o ring with my puck and I was going to look and see where the prong on my old puck was but it didn’t have one. Now I’m wondering if it’s even supposed to have one.

Author:  WWDiesel [ Thu Feb 11, 2021 5:39 pm ]
Post subject:  Re: CCV valve or the puck

Two O rings as pictured below, Item no. 5

Image

Author:  Chuci [ Thu Feb 11, 2021 5:55 pm ]
Post subject:  Re: CCV valve or the puck

WWDiesel wrote:
Two O rings as pictured below, Item no. 5

Image
Is it a special o ring if you know?

Author:  WWDiesel [ Thu Feb 11, 2021 6:15 pm ]
Post subject:  Re: CCV valve or the puck

Chuci wrote:
Is it a special o ring if you know?

Any O ring that is rated for oil and heat.

See this:> https://www.phelpsgaskets.com/blog/how- ... plications

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/