Look at the transfer case shift lever on side of transfer case, (picture 1) in 2 w/drive it should be setting in this position. about 2:00
Position indicator switch location on top of transfer case, picture 2
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Light says 4WD Part time http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=91895 |
Page 1 of 1 |
| Author: | mtbdemon [ Wed Mar 17, 2021 11:05 pm ] |
| Post subject: | Light says 4WD Part time |
Hello all, Out and about one day and slipped the ol' girl into 4WD full time and when finished put the lever all the way forward and the light says "4WD part-time" The lever linkage seems to be a bit off as if I move it back one notch, the light goes out, but feel like its in 4WD. Crawled unnder and I don't see that there is any linkage to adjust thinking the sensor was slightly off...ANy ideas? Thanks Ken PS-Have a Rock Lizard slider set and tank guard for sale if interested. Never installed. Contact if interested. |
|
| Author: | layback40 [ Thu Mar 18, 2021 2:33 am ] |
| Post subject: | Re: Light says 4WD Part time |
Hi, I have had the same issue for some time. The sensor is on top of the TC and so is very hard to get to. If u can establish its in 2wd when the leaver is forward, just work on it being one spot off for the sensor. If I ever get to it I will try and unscrew the sensor and see if the indication goes out. If it does I will put a washer on the sensor to lift it. If not I will see if there is a washer on the sensor, remove it and see if that fixes it. Wont be doing it any time soon though. If you decide to try, please let us all know the outcome. |
|
| Author: | mtbdemon [ Thu Mar 18, 2021 12:50 pm ] |
| Post subject: | Re: Light says 4WD Part time |
layback40 wrote: Hi, I have had the same issue for some time. The sensor is on top of the TC and so is very hard to get to. If u can establish its in 2wd when the leaver is forward, just work on it being one spot off for the sensor. If I ever get to it I will try and unscrew the sensor and see if the indication goes out. If it does I will put a washer on the sensor to lift it. If not I will see if there is a washer on the sensor, remove it and see if that fixes it. Wont be doing it any time soon though. If you decide to try, please let us all know the outcome. GREAT info, thanks Is there a easy/good way to determine if it is or is not in 4WD? |
|
| Author: | Jay ne Ohio [ Thu Mar 18, 2021 12:53 pm ] |
| Post subject: | Re: Light says 4WD Part time |
I've had this problem a couple times after using 4wd low and switching back to 2wd. It is in 2wd, but the light says 4wd parttime. The light eventually goes out. Sometimes a few days, but sometimes a few weeks. |
|
| Author: | mtbdemon [ Thu Mar 18, 2021 1:18 pm ] |
| Post subject: | Re: Light says 4WD Part time |
Thats quite a collection of CRD's!! |
|
| Author: | WWDiesel [ Thu Mar 18, 2021 2:06 pm ] |
| Post subject: | Re: Light says 4WD Part time |
Look at the transfer case shift lever on side of transfer case, (picture 1) in 2 w/drive it should be setting in this position. about 2:00 Position indicator switch location on top of transfer case, picture 2
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|