Update:
Here's pics of the custom oil-supply line parts. I'll check the hydraulic shop receipt and provide specs on fittings:
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Fitting & Thread spec of block's oil supply line to turbo? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=91973 |
Page 1 of 1 |
| Author: | Gypsy62 [ Tue Jun 15, 2021 8:37 pm ] |
| Post subject: | Fitting & Thread spec of block's oil supply line to turbo? |
Replacing the stock fixed line with braided hose. To insure compatible fittings it would be very helpful if somebody knows the correct specs for the block's threaded male tap. Looking forward to not wrestling around the stock rigid steel line in the future. Also, it can't hurt to loop the supply line under and in front of the turbo, away from the exh man & downpipe regional heat. Thanks! Keys: Liberty CRD turbo oil supply line upgrade replacement mod modification thread specification type |
|
| Author: | Gypsy62 [ Mon Sep 20, 2021 1:23 am ] |
| Post subject: | Re: Fitting & Thread spec of block's oil supply line to turb |
Update: Here's pics of the custom oil-supply line parts. I'll check the hydraulic shop receipt and provide specs on fittings:
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|