LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Automotive buses and lack of scan-ability in 05 CRD
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=92120		 Page 1 of 1
Author:  Boss [ Fri Nov 12, 2021 3:11 pm ]
Post subject:  Automotive buses and lack of scan-ability in 05 CRD
Howdy.
It's been a while since I last posted (too many issues to explain.) The 05 CRD has been a reliable work truck before I retired for the second time. After retirement, it transported me to Albuquerque and Santa Fe many times for treatments. Last winter 2020 I replaced almost everything in the front end 8) Now I'm troubleshooting rich running and oil dribbles on the passenger(right) side and rear of the engine. Having done a massive amount of research on the 05's inability to communicate with most scanners. I've come across some information geeks like myself may find interesting. The first one I found here, which led me to the second and so on.: http://www.interfacebus.com/Interface_Bus_Types.html
http://www.interfacebus.com/Design_Connector_Automotive.html
http://www.interfacebus.com/Interface_Cable_Buses.html
and finally http://www.interfacebus.com/Design_Connector_Automotive.html
Author:  synthetic-oil [ Sat Nov 13, 2021 8:21 pm ]
Post subject:  Re: Automotive buses and lack of scan-ability in 05 CRD
When I was having some ABS issues I found Garage Pro. You will be able to access ALL modules. This is how I found That I needed another ECM. I was getting a U code (can't remember exactly what it was) but it was having comm issues on the cam buss
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/