| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| xtool D7/D8 scanner http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=92234 |
Page 1 of 1 |
| Author: | Steve777 [ Thu Mar 03, 2022 5:39 pm ] |
| Post subject: | xtool D7/D8 scanner |
Still looking around for a capable DIY scanner, and ran across the Xtool D7 and D8 models. Just curious if anyone here had had any experience with them and can comment. Also xtool makes a BT unit (the A30x), which has less features but looks good on paper. Anyone use one of these? TIA |
|
| Author: | synthetic-oil [ Mon Mar 07, 2022 11:44 am ] |
| Post subject: | Re: xtool D7/D8 scanner |
I haven't had any dealings with the Xtool D7. What I have learned looking for a scanner is the ads/descriptions are not accurate. If you are going to spend money on one you need to make sure it will do what you want. Don't get an iCarsoft US. The add states it will work on a Jeep. It says if year is before 2005 or after 2014. I needed to injector coding. Ad states it can. It Can't. It can only do 2011 - 2013. Wrote the manufacture and crickets. I started emailing the manufactures. The FOXWELL NT530 is supposed to do this according to the manufacture. I haven't bought one yet so I don't know. Something is wrong with the Unison-Ring so got to get the turbo off and see what happened. |
|
| Author: | DeanBranson [ Fri May 20, 2022 3:13 am ] |
| Post subject: | Re: xtool D7/D8 scanner |
I have a Foxwell NT530 https://www.foxwelldiag.com/products/foxwell-nt530, and it works well. But I think you may contact the manufacturer first, I used to email the vehicle info and VIN to make sure it has the specific functions I needed. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|