I have a 3" lift on my 2006 Liberty

Got some wheel adapters so that I can use the 5x5 rims.

I'd like to put on some newer rims off of a wrangler with 255/70r18 tires.

Will they fit or rub?

Bump. Hope some experts would chime in.

_________________
2007 Jeep Wrangler JK 2dr 4x4 Rubicon

Might have better luck posting in the "Tires, Tyres, Meats, Donuts & Wheels" section. But, the tires you list are really big. On thing for sure, if they "might" work, they would definitely need the pinch weld pounded flat.

_________________
2005 Liberty Limited CRD; Air Filter Monitor; Samco Hoses; GDE HOT Tune; RL037142AA TC; KJ Interior Rack from All J Products; JBA Adjust-a-strut lift and A-Arms; 245/75R16 Firestone Destination ATs on Moabs; ARB Bumper; ASFIR Skids; FS-2500 Bypass Filter; ARP studs.
2016 Grand Cherokee Overland CRD.

Judging from this thread, http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=84387, it seems that unlifted, even 30.5 inches is too big.

According to Mountainman in the http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=89151 thread, with a 2.5" lift the 255/70's (32.5 inches) require a lot of other mods. The extra half inch your asking about probably won't change that much.

Use the search function; somebody has probably tried it and explained what they did.

_________________
2005 Liberty Limited CRD; Air Filter Monitor; Samco Hoses; GDE HOT Tune; RL037142AA TC; KJ Interior Rack from All J Products; JBA Adjust-a-strut lift and A-Arms; 245/75R16 Firestone Destination ATs on Moabs; ARB Bumper; ASFIR Skids; FS-2500 Bypass Filter; ARP studs.
2016 Grand Cherokee Overland CRD.