Hi, I have a 2006 CRD, in the cluster there are 3 lights off and in the cluster diagnostic aren't showing either, there are 2 options:
1. To dissemble the cluster and send it to someone to replace the LEDs on the board
2. To install a 2005 CRD used cluster that I found but the 2005 cluster is in KM and my current cluster is in miles.
If I swap the cluster does the velocimeter will measure the KMs fine or should I need to change something else?
If the 2005 cluster in the center-bottom the oil pressure and traction control are different it might cause conflict or it work at all?
Thanks for the information you can bring!
