Part recommendations, water pump and fuel injector seals

olddesertrat · **Joined:** Sat Jul 28, 2018 10:54 am **Posts:** 34

Hello!!
Decided to fix my 2005 CRD with likely busted valves. Need some recommendations on parts.

1. Will be pulling off fuel injectors. Understand they have 'use once' crush sealers that need to replaced. Was recommended Sasquatch Parts for crush seals, but did not see them on website. Where would be a good place to buy them?

2. Of course going to change water pump as long as it is removed. Recommendation on brand and where to buy?
Also, see European models of Jeep Liberty with 2.5L and 2.8L VM engine use Crown water pump 5093911AB, which can be bought for $69. Can this be used on US model Jeep Liberty? Looks to be same shape and mounts onto same engine.

Everybody have a great day!!!

WWDiesel · **Posted:** Fri Mar 17, 2023 4:45 pm

Don't waste your money on Crown parts, they are chinese junk!
You can purchase all your rebuild needs from IDParts.com
Valves, Graf Brass Water Pump (recommended), Timing Belt Kit, comes with belt, and idler pulleys, Timing Belt tensioner pulley assembly.

https://www.idparts.com/timing-belt-kit ... -2721.html

olddesertrat · **Joined:** Sat Jul 28, 2018 10:54 am **Posts:** 34

Thanks

Wow, are the injector seals expensive! $13 per injector, or $51 total...for 4 copper washers and 4 rubber rings.
But got to do what you got to do. Will be ordering parts today.

WWDiesel · **Posted:** Sat Mar 18, 2023 2:43 pm

olddesertrat wrote:

Thanks

Wow, are the injector seals expensive! $13 per injector, or $51 total...for 4 copper washers and 4 rubber rings.
But got to do what you got to do. Will be ordering parts today.

Quote:

Mopar online dealer pricing, for comparison.
O RING. Required: 004 (Current price)$ 9.70ea
SEAL. Fuel Injector. Lower, Required: 004 (Current price)$ 7.08ea

$67.12 for set of 4! :shock:

IDParts don't look so bad now, do they? :mrgreen:

synthetic-oil · **Joined:** Tue Sep 24, 2013 8:03 pm **Posts:** 140

I buy my injector stuff from https://oregonfuelinjection.com/. O-Ring 3.47. I bought extra clips, return line Tee's and elbow to have on hand. They don't have the crush washer listed but I emailed them and they have them.

olddesertrat · **Joined:** Sat Jul 28, 2018 10:54 am **Posts:** 34

Thanks for info.

Doing internet research, do see crown water pumps failure reports. Also, from pictures looks like Crown uses plastic impeller...how cheap!!!

Did order parts from Oregonfuelinjection.

Rain has stopped, will pull off valve cover when warms up little more.

Part recommendations, water pump and fuel injector seals

Who is online