It is currently Fri Apr 26, 2024 12:51 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: ARP IPC 4044 stud kits sold out.
PostPosted: Thu Mar 30, 2023 10:35 pm 
Offline
LOST Newbie

Joined: Sat Jul 28, 2018 10:54 am
Posts: 34
Starting to source parts for cylinder head rebuild and replacement. IDparts seems to have it mostly covered. However they are out of ARP stud kits for CRD engines. Searched internet and did not find any in stock.

Any members out there have any extra kits or sources for ARP stud kits?


Top
 Profile  
 
 Post subject: Re: ARP IPC 4044 stud kits sold out.
PostPosted: Sat Apr 01, 2023 2:58 pm 
Offline
LOST Junkie

Joined: Sun May 01, 2011 2:27 pm
Posts: 833
Location: Milford, IL
There plenty of arp studs on the market. But more expensive anywhere else compared to idparts

_________________
2005 Crd Silver Limited- arps, rockers, 7v etechno's, egr deleted, v6 airbox, metal cac's. Yeti's stage 2 tune. Euro TC, Ram tcm, pml transmission pan, facet lift pump


Top
 Profile  
 
 Post subject: Re: ARP IPC 4044 stud kits sold out.
PostPosted: Mon Apr 03, 2023 1:36 pm 
Offline
LOST Member

Joined: Thu Feb 18, 2010 12:12 am
Posts: 231
Location: Alaska
Buy two of the VW ARP kits and have two studs extra. I'll look for the ARP part # when I'm in my shop later.


Top
 Profile  
 
 Post subject: Re: ARP IPC 4044 stud kits sold out.
PostPosted: Mon Apr 03, 2023 2:03 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7176
Location: Central GA
olddesertrat wrote:
Starting to source parts for cylinder head rebuild and replacement. IDparts seems to have it mostly covered. However they are out of ARP stud kits for CRD engines. Searched internet and did not find any in stock.
Any members out there have any extra kits or sources for ARP stud kits?

Have you tried Whitebread performance? They are slightly cheaper than IDParts and their web site does not show them as being unavailable.
Worth a try. :juggle:
https://whitbreadperformance.com/produc ... d-stud-kit

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: ARP IPC 4044 stud kits sold out.
PostPosted: Mon Apr 03, 2023 5:36 pm 
Offline
LOST Newbie

Joined: Sat Jul 28, 2018 10:54 am
Posts: 34
Did email Whitebeard to check if in stock. No reply yet. Message on website says they are out till Mid April, so may just have to wait.


Top
 Profile  
 
 Post subject: Re: ARP IPC 4044 stud kits sold out.
PostPosted: Fri Apr 07, 2023 8:13 pm 
Offline
LOST Member

Joined: Thu Feb 18, 2010 12:12 am
Posts: 231
Location: Alaska
ARP Studs for the 2.8 CRD box info:

#204-4706 VW/AUDI 1.9L TURBO DIESEL HSK.

You'll need two kits and end up with two extra studs.


Top
 Profile  
 
 Post subject: Re: ARP IPC 4044 stud kits sold out.
PostPosted: Sun Apr 09, 2023 8:45 pm 
Offline
LOST Member

Joined: Sat Jul 10, 2010 7:38 pm
Posts: 438
Location: The Dalles, OR.
https://www.xtremediesel.com/arp-head-stud-kit-204-4706

_________________
GDE FT Ecotune, EHM, Weeks kit stage 1 & 2, Carter 4600 lift pump, Upgraded tranny, Fishing boat hauler!
New at 164K: head gasket, rockers, exhaust valves, ARP head studs, Injectors, 5v Bosch glow plugs, water pump, timing everything, serpentine everything,
New at 225k: new head, timing belt


Top
 Profile  
 
 Post subject: Re: ARP IPC 4044 stud kits sold out.
PostPosted: Thu Apr 13, 2023 11:52 am 
Offline
LOST Member

Joined: Sat Jul 10, 2010 7:38 pm
Posts: 438
Location: The Dalles, OR.
Just called ID Parts and head studs are still 6 weeks out. I also noticed that the replacement head just went up $200. That sucks!

_________________
GDE FT Ecotune, EHM, Weeks kit stage 1 & 2, Carter 4600 lift pump, Upgraded tranny, Fishing boat hauler!
New at 164K: head gasket, rockers, exhaust valves, ARP head studs, Injectors, 5v Bosch glow plugs, water pump, timing everything, serpentine everything,
New at 225k: new head, timing belt


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 123 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com