LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

2006 crd rear main seal small o-ring install
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=92684
Page 1 of 1

Author:  jsprague84 [ Sun May 21, 2023 5:40 pm ]
Post subject:  2006 crd rear main seal small o-ring install

looking for advice on correctly installing the small orange. I got the idparts kit with the rear main seal a big o-ring, and a small o-ring. the big o-ring and seal are self-expanitory, but the small o-ring doesn't seem to have a groove to seat it in the new main seal. any help would be appreciated.

Author:  WWDiesel [ Sun May 21, 2023 11:20 pm ]
Post subject:  Re: 2006 crd rear main seal small o-ring install

You could contact CaptainDean (message or email him) on this forum, he probably has the most experience with rear main seals on this engine that I am aware of.

Maybe this will be of help?

Image

Author:  jsprague84 [ Mon May 22, 2023 2:26 pm ]
Post subject:  Re: 2006 crd rear main seal small o-ring install

Thank you. I need to double check that I switched over the thrust washer properly.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/