03black wrote:
Just a few thoughts that might help you out. I'm sure other will chime in and give there thoughts.
Did you make sure that the CAM sensor wire plug and the #4 injector wire plug are not swapped? They look the same and can be plugged into each other. Its has been an issues for people before in the past when they do this kind of work and then the jeep won't start.
Also, since you have an 06' there is a wire chaffing problem with a ground behind the fuel filter. Might want to check that area to make sure everything looks good since you had to move the wire harness bundle out of the way to lift the head off to change the rockers.
Let us know what you find
Hello all thanks for your help. I absolutely checked and double checked everything. As good practice I mark and color code all my plugs, so I know that all my plugs are in the right place. I walked away from the Jeep for a few days and just ordered a new crank sensor. it should arrive next week. i did change the cam sensor and still nothing. My Snap on scanner will not read it maybe because its for BIG RIGS and equipment. I have a pocket scanner that connects to my phone and im able to read my pressures. All pressures fine just no spark to wake her up. I will resume on this project when the parts come in and i will keep you posted.
Thanks again for the help.