Brke Fluid Flush

Steve777 · **Joined:** Fri Oct 16, 2015 11:31 pm **Posts:** 279

Planning to replace rotors and pads and flush the old brake fluid out on one of CRDs. Done this many times on other vehicles, but thought I would ask is there anything special/tricky about doing this on our Jeeps? Seem to recall that some more advanced code readers have an ABS flush feature (which mine does not have), just wondering is that is really necessary. Or will the old tried and true method work?

WWDiesel · **Posted:** Mon Jul 24, 2023 10:52 pm

Steve777 wrote:

Planning to replace rotors and pads and flush the old brake fluid out on one of CRDs. Done this many times on other vehicles, but thought I would ask is there anything special/tricky about doing this on our Jeeps? Seem to recall that some more advanced code readers have an ABS flush feature (which mine does not have), just wondering is that is really necessary. Or will the old tried and true method work?

I just flush them using a Motive Products Power Bleeder model 1113 for Mopars, nothing special required.
Suck out all the old fluid out of the brake reservoir, refill with new Dot 4 fluid and then using the power bleeder bleed each wheel until new clean fluid is observed.

Brke Fluid Flush

Who is online