Went down town to the pawn shop and on my way back I lost power, CEL came on so I limped back home. I hooked up my code reader and there are no codes. I checked under the hood can't see anything obvious. I'm running GDE software with no other mods. The CEL will not clear. It's hot out in the upper 90's at the time of the problem. Trans shifts but eratically.
update: To add a wierd thing, the code reader in live data the RPM is 380 but the dash tack reads 750.
Update: Everything seems to back to normal except the CEL and RPM read with the code reader.