graycenphil wrote:
Just ordered one from Idparts this morning, but thanks for the generous offer. Hopefully someone else can use it - mine’s probably not the only one rusting out.
Two more questions, if you don’t mind.
1) The kit comes with a spin on return filter. Where is that?
2) Kit also comes with a pan gasket. Do you use that instead of silicone, or with silicone?
Thanks again.
Spin on filter is inside pan along with the flat suction filter. You will see it when you drop your pan.
Use the gasket along with some spray Hightack sealant on both side of the gasket.
or
use silicone only by it self, but do not use silicone on the gasket as it can make it squeeze out when you tighten the bolts.
Do NOT overtorque the bolts when using a gasket, it can damage the gasket.
or
If you want the very best oil pan gasket made, get a LubeLocker Transmission Gasket PN: RFE- LLT-CRFE, it has silicone embedded into the gasket material.
https://www.lubelocker.com/products/chr ... e-llt-crfeIt is the very best gasket for pans and differential covers I have ever used, fully leakproof and reusable. See picture below.
RFE- LLT-CRFE Chrysler, Jeep, Dodge RFE Transmission. Also Fits 68RFE, 66RFE, 65RFE, 545RFE, and 45RFE
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve