LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Gauges to match
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=9282		 Page 1 of 1
Author:  deviousz [ Wed Jun 07, 2006 12:50 am ]
Post subject:  Gauges to match
I've got an 06 CRD and am considering pyro and boost gauges on the a-pillar. Anyone know which ones will match stock the best?

TIA
Author:  DZL_LOU [ Wed Jun 07, 2006 7:28 am ]
Post subject:  Re: Gauges to match
deviousz wrote:
I've got an 06 CRD and am considering pyro and boost gauges on the a-pillar. Anyone know which ones will match stock the best?

TIA


Using the Socratic method and looking up previous posts will quickly allow you to get your answers without having to wait for someone to reply back. It will also not clutter the board with duplicated messages.
Please check this previous post http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=8747
Author:  Stan Wright [ Wed Jun 07, 2006 9:45 am ]
Post subject: 
I bought Autometer Cobalt gauges with the blue background and red needles. I thought these should match the factory guages well. I haven't had time to put them in to compare the two.
Author:  Ripster [ Wed Jun 07, 2006 12:29 pm ]
Post subject: 
To really be sure you would need to go one of many such as http://www.egauges.com. I like mine, but
I have had them before so the white face compared to a darker face of the Liberty does not matter to me,
what I wanted was at night to have the same color and that they do very well, but in the end everyone takes
a chance on exactly what it will look like and if you pick it yourself, then you are happy with it. I am close,
but a fanatic would say the face background is different, it was not a high priority for me.
Author:  deviousz [ Thu Jun 08, 2006 12:09 am ]
Post subject:  Re: Gauges to match
DZL_LOU wrote:
deviousz wrote:
I've got an 06 CRD and am considering pyro and boost gauges on the a-pillar. Anyone know which ones will match stock the best?

TIA


Using the Socratic method and looking up previous posts will quickly allow you to get your answers without having to wait for someone to reply back. It will also not clutter the board with duplicated messages.
Please check this previous post http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=8747


I've read that thread buddy, and it has nothing to do w/ my question. FYI, I searched for an hour or so before I made this post.

BTW, forums are for posting Einstein.
Author:  deviousz [ Thu Jun 08, 2006 12:11 am ]
Post subject: 
Ripster wrote:
To really be sure you would need to go one of many such as http://www.egauges.com. I like mine, but
I have had them before so the white face compared to a darker face of the Liberty does not matter to me,
what I wanted was at night to have the same color and that they do very well, but in the end everyone takes
a chance on exactly what it will look like and if you pick it yourself, then you are happy with it. I am close,
but a fanatic would say the face background is different, it was not a high priority for me.


Right, thx for the link. I did the same thing as you with my last car but this time I'd rather have them look as similar as possible. That for me means having the same background. I may just go the MPD route though, haven't made up my mind yet.
Author:  DZL_LOU [ Thu Jun 08, 2006 9:09 am ]
Post subject:  Re: Gauges to match
deviousz wrote:
DZL_LOU wrote:
deviousz wrote:
I've got an 06 CRD and am considering pyro and boost gauges on the a-pillar. Anyone know which ones will match stock the best?

TIA


Using the Socratic method and looking up previous posts will quickly allow you to get your answers without having to wait for someone to reply back. It will also not clutter the board with duplicated messages.
Please check this previous post http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=8747


I've read that thread buddy, and it has nothing to do w/ my question. FYI, I searched for an hour or so before I made this post.

BTW, forums are for posting Einstein.

Relax, Wow how quickly we get defensive.
Author:  deviousz [ Thu Jun 08, 2006 3:16 pm ]
Post subject: 
anyways....

There's been talk of the MPD from TS Performance (I know this from searching) :P , but has anyone installed one yet?
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/