18 views and no replies. Also not finding anything specific to Jeep Liberty CRD OBD2 monitor reset on-line.
Need to ask a big favor here.
Could somebody with Liberty CRD that has OBD2 fully set please hook up your OBD2 reader and tell me what letters are highlighted(set)? List letters or post picture.
Know I should have done this before clearing codes, and will do it and add to maintenance book as soon as OBD2 is fully set.
Update:
Going by drive cycles for Chrysler from this website:
https://justsmogs.com/2014/01/chrysler- ... -monitors/According to this website there are 7 OBD2 items that need to be set.
After 5 hours of driving, many cycles of idle, drive, idle and 305 miles of driving....have 4 monitors set.
By my OBD2 meter they are letters: M, F, CC, and E
Not 100% sure exactly which letter matches with OBD2 monitor.
thinking 3 more that I need are that are not set are:
Letters O, OH, and EV. Very likely those are for Oxygen and Oxygen Heater.
EV likely Evaporator system.
But this list is for sure for gasser. Don't know how well this applies to CRD
So asking again, could somebody with CRD please hook up OBD2 meter and tell me what letters are suppose to be set
Thanks.