| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| ECM-PCM Replacement http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=93040 |
Page 1 of 1 |
| Author: | Sergio del Castillo [ Thu Jan 09, 2025 11:13 am ] |
| Post subject: | ECM-PCM Replacement |
Hello you all, Happy new Year. My 2005CRD (276K miles) died on me while going to dinner one night last week.  The technician diagnostic was that the ECM-PCM was the faulty one. I was recommended to a company called "Car Computer Exchange" located in Raleigh, NC. for a re-manufactured replacement.Have any one have had experience with them or has used them before? Has anyone another recommendation? Any suggestion is wellcome, Thanks Sergio |
|
| Author: | bentrod [ Mon Jun 16, 2025 7:07 pm ] |
| Post subject: | Re: ECM-PCM Replacement |
I used autoecms 800-900-0194 autoecmstore.com Good luck to you |
|
| Author: | DieselJeepLuvr [ Sun Feb 01, 2026 6:40 pm ] |
| Post subject: | Re: ECM-PCM Replacement |
Find a good used one with the same last 3 digits in the part # and send it in to Green Diesel Engineering. He'll reprogram it for you but he will need your VIN and each of the 4 injector codes (6 digit alphanumerical) located on top of the injectors. |
|
| Author: | Sir Sam [ Fri Feb 06, 2026 10:49 pm ] |
| Post subject: | Re: ECM-PCM Replacement |
I can program a used ECU if you get one from ebay, car-part etc. https://youtu.be/rLIqALEaN4I |
|
| Author: | DieselJeepLuvr [ Wed Feb 18, 2026 1:07 am ] |
| Post subject: | Re: ECM-PCM Replacement |
Sir Sam wrote: That's awesome. I apologize I only made it through about half of that video before I got bored. Not sure what the video is there for. It's long and only describes how to program the ECM/PCM connected to the OBD2 port in the vehicle. That's great if you are sending the DRB 3 to the person with the problem but otherwise just send it to Keith at GDE. SO much easier. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|