Count me in
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| LoTek is pre-selling a 3-gauge pillar pod for the Liberty http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=9913 |
Page 1 of 4 |
| Author: | Tom_with_a_Dream [ Thu Jun 29, 2006 10:34 am ] |
| Post subject: | LoTek is pre-selling a 3-gauge pillar pod for the Liberty |
I have been in contact with LoTek (gaugepods.com) regarding the availability of a 3-pod pillar mount. They currently sell a 2-pod pillar (installed with satisfaction by several members). I am told that with 30 buyers, the per-unit cost would be $44, vinyl painted to match any color interior. I didn't ask what the turnaround time was. Personally, I had intended to mount some light switches on the third pod (upper, in my case) so I was hoping it could be larger than 2-1/16" (about 60mm), or perhaps oval (something like 50mm x 70mm). But if 30 of us want to go in, we'd have to agree on the sizes and three 2-1/16" pods makes the most sense for the most people. I have cross-posted this on the main page as well, despite the fact that most gassers won't be needing additional instrumentation. UPDATE - Turnaround would be about 6 weeks. |
|
| Author: | DarbyWalters [ Thu Jun 29, 2006 10:54 am ] |
| Post subject: | |
It would be nice to have EGT, Boost and Tranny Temp guages. |
|
| Author: | 0311_DoC [ Thu Jun 29, 2006 11:42 am ] |
| Post subject: | |
Ditto |
|
| Author: | CATCRD [ Thu Jun 29, 2006 12:48 pm ] |
| Post subject: | |
Ditto |
|
| Author: | DarbyWalters [ Thu Jun 29, 2006 2:59 pm ] |
| Post subject: | |
CATCRD wrote: Ditto
Is the "Ditto" guage the one that warns you that you have been here before...I think in Europe they call it the "Deja Vue" guage...but it only operates for s split second and then dissapears. |
|
| Author: | MrWinkey [ Thu Jun 29, 2006 7:22 pm ] |
| Post subject: | |
Please count me in. Boost/EGT/Tranny would make a nice combo....... |
|
| Author: | hatchetman [ Thu Jun 29, 2006 7:30 pm ] |
| Post subject: | |
Count me in
|
|
| Author: | oldnavy [ Thu Jun 29, 2006 9:08 pm ] |
| Post subject: | |
Only gage the wife is concerned with is FUEL gage, anything else is a waste. 
|
|
| Author: | Tom_with_a_Dream [ Thu Jun 29, 2006 10:57 pm ] |
| Post subject: | |
We are 30% of the way there, and nearly 50% if we count the "Maybe" votes... And only the first day!! I'm thinking the weekend might get us there. For the record, I have already bought a 2-pod pillar (assuming we wouldn't get the necessary 30, maybe I was wrong) but would be more than willing to re-install a 3-pod with the rest of you. Then I could add the Oil Press I skipped since I only had room for 5 gauges. |
|
| Author: | BIGPAPACRD [ Fri Jun 30, 2006 12:04 am ] |
| Post subject: | COUNT ME IN!!! |
You can definitely count me in guys!!! |
|
| Author: | KJbob [ Fri Jun 30, 2006 12:13 pm ] |
| Post subject: | |
I think I'm in. |
|
| Author: | Hero [ Sat Jul 01, 2006 10:55 am ] |
| Post subject: | |
I'd be up for it, let me know! 
|
|
| Author: | Tom_with_a_Dream [ Tue Jul 04, 2006 2:43 pm ] |
| Post subject: | |
Looks like we are hanging tough at 20 votes for a custom pillar pod, ten short of the 30 to make it justified. Oh well, I'll install my 2-pod (already ordered) and be happy with my switches on the knee panels. I will post some pictures and whatnot of my installl when I get it done. Parts not in yet and I am travelling next week it looks like. Hope everyone enjoys the fireworks and that no one burns the neighborhood down... |
|
| Author: | Pablo [ Fri Jul 07, 2006 1:11 am ] |
| Post subject: | Liberator has a three pod pillar |
Banks is listed as doing the mods to the Liberator-- it has a three pod pillar with banks labeled guages. So, where did they get it from? |
|
| Author: | 0311_DoC [ Fri Jul 07, 2006 1:13 am ] |
| Post subject: | |
one word ...... CUSTOM |
|
| Author: | murf [ Tue Jul 11, 2006 3:47 am ] |
| Post subject: | |
I'm most definitely in. Especially if it will get rid of that Nasty grab handle! |
|
| Author: | dmv [ Thu Jul 13, 2006 11:59 pm ] |
| Post subject: | |
Count me in. |
|
| Author: | crdmike [ Fri Jul 14, 2006 7:18 am ] |
| Post subject: | |
Count me in! |
|
| Author: | CrayZ [ Fri Jul 14, 2006 9:18 am ] |
| Post subject: | |
count me in 2 |
|
| Author: | Tom_with_a_Dream [ Fri Jul 14, 2006 9:46 am ] |
| Post subject: | |
I've contacted LoTek and asked that they consider setting up the "pre-sale area". It looks to me like we buy the pod and when the magic 30 is reached they go ahead and make the mold and so on. There is a few week turnaround expected from mold to production, however. I hope to report soon with a link to that "pre-sale area". I'll keep everyone posted. |
|
| Page 1 of 4 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|