| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| crd oil contamination fix http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=993 |
Page 1 of 1 |
| Author: | pbshire [ Mon Aug 08, 2005 5:15 am ] |
| Post subject: | crd oil contamination fix |
hi there for all the ozzie crd drivers some info that might help (copy on the ausjeep board) Ill start a discussion about the turbo diesel and there poor design. After 45000ks and most of it towing a trailer (Tvan of course) engine performance has dropped markedly, upon inspection the intercooler is full of blow by oil 2003 model picks up at top of engine and connects to the air inlet pre turbo . So all the crankcase fumes and oil contaminants are fed to the turbo charger thru the intercooler and into the engine . Problem is hot gases when cooled condense inside the intercooler slowly blocking it up . VW have had the same problem with there turbo diesels they now fit the following as oem Mann and Hummel Provent 200 http://www.mann-hummel.com/mhuk/upl...HBGDHjDBaVQ.pdf part no : 390 310 70 550 Have one on order from Mann and Hummel Sydney contact 02 9484 4300 fax 9484 4175 qouted at $275.00 plus gst They can also supply oem oil and air filters oil part no w 719-14 $16.11 plus gst air part no :c 2975 $ 25.14 plus gst Give claude a call if your interested not sure whats in stock ex germany quoted one month delivery . |
|
| Author: | LibertyCRD [ Mon Aug 08, 2005 7:36 am ] |
| Post subject: | |
This is what I came in here to ask about. 
Has anyone in the U.S. fitted one of these ProVent filters onto their CRD yet? I'm wondering how exactly it connects inline with everything. It sounds like a good thing to do. If anyone knows anything more about this problem or the ProVent filter that can supposedly stop it let me know... |
|
| Author: | pbshire [ Mon Aug 08, 2005 8:24 am ] |
| Post subject: | |
try doing a google search i found an article on a tdi vw owner who installed on his vehicle not to hard mainly finding a place to mount the unit and route the hoses to and from the manifold and air intake . 
|
|
| Author: | cevans [ Wed Aug 24, 2005 9:17 pm ] |
| Post subject: | |
Here is a link to a HOW-TO for a Provent install on a VW TDI. The CRD is, for all intents and purposes, the same thing in this regard. The CCV is pretty much in the same location too... http://forums.tdiclub.com/showflat.php?Cat=0&Number=849611&page=&fpart=1&vc=1 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|