Mounted up 4 Hella FF75s on my BVG rack.
I used eyebolts thru the rack, with a washer above and below and the hella supplied mounting bolt thru the washers and eye.
I used a 4-wire trailer wiring plug after cutting the supplied Hella harness to facilitate taking the rack and lights on and off.
I mounted the switches to the left of the steering column. where the switch for a renegade lightbar would be. The left switch controls the two outside lights and the right switch controls the middle 2 lights.
-------------------
Before Moab, I built a mount for my hi-lift on the BVG rack.
I used a piece of flat stock folded into a "U" shape and then put a bolt with a spacer thru it. Overall preety simple design, but functional.
_________________
2008 Unlimited Rubicon - 3.5" AEV/Nth lift - 35" MT/R with Kevlar - AEV Wheels - York OBA
2008 Patriot - Fuel Saver