my sliders, getting there... update! done

ratmloud · **Posted:** Sun Apr 08, 2007 7:04 pm

3/16 steel , i didnt weight them though sorry

gopherbeats · **Posted:** Sun Apr 08, 2007 11:28 pm

I have never weighed them either.. but comparing them to weights at the gym.. I'd say 45 .. 50 lbs a piece.

jposada_us · **Posted:** Mon Apr 09, 2007 11:56 am

Thanks ratmloud and gopherbeats for your answer, have another question

In the pic I can see you use screw to hold it, do you drill completely through the frame os just one of the two walls?

Regards

gopherbeats · **Posted:** Mon Apr 09, 2007 12:54 pm

You need to drill completely through the pinch weld to attach your 'support', as labeled in your diagram. On the frame beams though, you only need to drill a pilot hole (1/4" or so), then bolt the rock rails up with some self tapping bolts.

Donkeykong · **Posted:** Mon Sep 24, 2007 11:35 pm

Those look nice, I definently want to try and make some of the kind with the step on them... still watching the blueprint type threads...
-Mark

0240kliberty · **Joined:** Sat May 05, 2012 5:06 pm **Posts:** 6

How far out about do they stick out from the frame rails? They look great

candpliberty · **Posted:** Mon May 07, 2012 11:21 am

Second to the bottom post on page 2:
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=62889&start=20

vincennescrd · **Posted:** Mon May 07, 2012 12:42 pm

How about some deminsions. I'd like to make a set. How far out do they stick past the body. Couldn't tell from pic

candpliberty · **Posted:** Mon May 07, 2012 1:48 pm

I set the outside of the rails even with the outside of the flairs. Someday I'll add a extra 1 to 1 1/2 inch rail to add some stand off. Did you see the diagram on page two, near the bottom?

vincennescrd · **Posted:** Tue May 08, 2012 1:42 am

I see it now. Sorry guess I missed it.

my sliders, getting there... update! done

Who is online