LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

i need to mount my switches.
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=18399		 Page 1 of 1
Author:  riptricket [ Fri Mar 09, 2007 3:11 pm ]
Post subject:  i need to mount my switches.
okay, i have the original lightbar with the renegade package, and have put on a pair of Hella ff75's and am going to buy some Hella 500 driving lights and i am going to use my old walmart crappers as back-up lights (also to give people a little flash of light to get off of my booty on the highways!) and i need to be able to mount the three light switches for right hand use. i was thinking somewhere along the area of the emergency brake or something like that. if anyone has doen this or has any idea i'd greatly appreciate it!
Author:  Gris [ Fri Mar 09, 2007 4:19 pm ]
Post subject: 
I put mine in my EVIC, which you don't have. These are my old switches, new ones are larger and better and all 3 fit fine...

Image

Maye you can get a bracket of sorts and put it into the headliner in front of the reading lites?

I'd say to put them in the little peice of trim between the steering wheel and the radio console, but I don't think you's fit more than 1 or 2 switches there.

Do you have the cigarette lighter and aux power or just aux? with just the aux, there should be a cubby there that you can make a cover for to mount the switches.
Author:  Blue KJ in PA [ Sat Mar 10, 2007 12:05 am ]
Post subject: 
There was a guy on here a long time ago that had fabbed up an insert for that little cubby to have switches and I believe he had posted as a vendor for sale on these
Author:  Jeepjeepster [ Wed Mar 14, 2007 5:41 pm ]
Post subject: 
Why not put them beside the switch for the stock light bar? :?
Author:  riptricket [ Thu Mar 15, 2007 12:20 am ]
Post subject: 
i don't want to drill into the libby's parts on the inside, b/c i do not know how many switches i am going to need just yet.
Author:  Stampey [ Tue Mar 20, 2007 10:28 pm ]
Post subject: 
I have my switches set up exactly how you want them... Ill post a picture when i get a chance a litle later. I used a piece of metal, and attached it to the input/ouptput port under the dash, right along the parking brake...
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/