LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

rock rails boulderbars etc
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=29647		 Page 1 of 1
Author:  ga_repoman [ Tue Feb 19, 2008 6:13 am ]
Post subject:  rock rails boulderbars etc
Working on fabbing up my own set of side sliders and wondering if there is a drawback to :idea: welding to the frame as opposed to drilling and bolting other than the fact that removal for repair would be a lot harder ..

Also to the pinch weld ...weld it there too

I know not too much heat:twisted: in one place and watch for warping but if you took the time and did this is there really a disadvantage ..... :?: :?: :?:

Somebody at somepoint had to have had a POS truck that they just said ":-)r :-)r F@&# IT:-)r :-)r " in a drucken stooper and done this ....... :?: :?: :?:

so what are the pros and cons to this installation

thankyou all for your time and input
Author:  Blue KJ in PA [ Tue Feb 19, 2008 7:55 am ]
Post subject: 
The shop formerly known as Carolina Rock Shop had fabbed up some awesome rails and had the option of bolt or or welded on when they installed them.
Author:  dloc_jeep_KJ [ Tue Feb 19, 2008 1:57 pm ]
Post subject: 
why not just make them bolt on? there is just not a good reason to weld them on really.
Author:  ga_repoman [ Tue Feb 19, 2008 4:04 pm ]
Post subject: 
well im going to make them bolt on but was wondering if there are any drawbacks to welding them on????
Author:  tjkj2002 [ Tue Feb 19, 2008 8:42 pm ]
Post subject: 
ga_repoman wrote:
well im going to make them bolt on but was wondering if there are any drawbacks to welding them on????
The fact that if you bend them then it will be a real fun job cutting them off.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/