[img][img]http://img413.imageshack.us/img413/7978/dscf1347ru4.th.jpg[/img]
![[img]http://img413.imageshack.us/img413/7978/dscf1347ru4.th.jpg[/img]](http://img413.imageshack.us/my.php?image=dscf1347ru4.jpg){kind=link}
Just got done with mount for the Hi Lift my son gave me for birthday last December. Also finished fabbing and installing swing tire mount and front hitch on XJ. the front hitch is next in line to paint and mount (rattle can bed liner) for the KJ. Need to do this and Clevis lift before Colorado ,Gunny C.B. area in July may even see if the Moabs and Wrangler 245/75/16's work out. The hi lift mount is made from 2 Yakama Kayack posts that clamp on the bars the aluminum tubes replaced with steel tubes that I welded 3/8 16 SS bolts through and welded the heads to the tubes scrounged aluminum knobs hold the jack on a rubber pipe isolator cushions the contact between the jack and the tube rubber washers and ss washers are under the knobs Have not locked it yet[/img]
[/img]